$Id: README.eicon,v 1.1.4.1 2001/11/20 14:19:33 kai Exp $ (c) 1999,2000 Armin Schindler (mac@melware.de) (c) 1999,2000 Cytronics & Melware (info@melware.de) This document describes the eicon driver for the Eicon active ISDN cards. It is meant to be used with isdn4linux, an ISDN link-level module for Linux. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. Supported Cards =============== Old ISA type ------------ - S-Card ISA - SX-Card ISA - SXn-Card ISA - SCOM-Card ISA - Quadro-Card ISA - S2M-Card ISA DIVA Server family ------------------ - DIVA Server BRI/PCI 2M - DIVA Server PRI/PCI 2M (9M 23M 30M) - DIVA Server 4BRI/PCI supported functions of onboard DSPs: - analog modem - fax group 2/3 (Fax Class 2 commands) - DTMF detection ISDN D-Channel Protocols ------------------------ - ETSI (Euro-DSS1) - 1TR6 (German ISDN) *not testet* - other protocols exist for the range of DIVA Server cards, but they are not fully testet yet. You can load the module simply by using the insmod or modprobe function : insmod eicon [id=driverid] [membase=] [irq=] The module will automatically probe the PCI-cards. If the id-option is omitted, the driver will assume 'eicon0' for the first pci card and increases the digit with each further card. With a given driver-id the module appends a number starting with '0'. For ISA-cards you have to specify membase, irq and id. If id or membase is missing/invalid, the driver will not be loaded except PCI-cards were found. Additional ISA-cards and irq/membase changes can be done with the eiconctrl utility. After loading the module, you have to download the protocol and dsp-code by using the eiconctrl utility of isdn4k-utils. Example for loading and starting a BRI card with E-DSS1 Protocol. eiconctrl [-d DriverId] load etsi Example for a BRI card with E-DSS1 Protocol with PtP configuration. eiconctrl [-d DriverId] load etsi -n -t1 -s1 Example for loading and starting a PRI card with E-DSS1 Protocol. eiconctrl [-d DriverId] load etsi -s2 -n Details about using the eiconctrl utility are in 'man eiconctrl' or will be printed by starting eiconctrl without any parameters. ISDNLOG: With eicon driver version 1.77 or newer and the eiconctrl utility of version 1.1 or better, you can use the isdnlog user program with your DIVA Server BRI card. Just use "eiconctrl isdnlog on" and the driver will generate the necessary D-Channel traces for isdnlog. Thanks to Deutsche Mailbox Saar-Lor-Lux GmbH for sponsoring and testing fax capabilities with Diva Server cards. Any reports about bugs, errors and even wishes are welcome. Have fun ! Armin Schindler mac@melware.de http://www.melware.de