#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
mainmenu_name "Linux Kernel Configuration"

define_bool CONFIG_ARM y
define_bool CONFIG_SBUS n
define_bool CONFIG_UID16 y
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y

# Begin uclinux additions -----------------------------------------------------
define_bool CONFIG_UCLINUX y
define_bool MAGIC_ROM_PTR y
# End uclinux additions -------------------------------------------------------


#------------------------------------------------------------------------------
#                         C o d e    m a t u r i t y
#------------------------------------------------------------------------------
mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
bool 'Prompt for obsolete code/drivers' CONFIG_OBSOLETE
endmenu
#------------------------------------------------------------------------------
#                      L o a d a b l e    M o d u l e
#------------------------------------------------------------------------------
mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu
#------------------------------------------------------------------------------
#                               S y s t e m
#------------------------------------------------------------------------------

mainmenu_option next_comment
comment 'System Type'
choice 'ARM system type'	\
	 "TI-DSC21		CONFIG_ARCH_DSC21 \
	  Conexant		CONFIG_ARCH_CNXT \
	  NET+ARM		CONFIG_ARCH_NETARM \
	  SWARM			CONFIG_ARCH_SWARM \
	  Samsung		CONFIG_ARCH_SAMSUNG \
	  Atmel			CONFIG_ARCH_ATMEL" TI-DSC21

bool 'Generate big endian code' CONFIG_CPU_BIG_ENDIAN

if [ "$CONFIG_ARCH_CNXT" = "y" ]; then
choice ' Conexant/Mindspeed architecture' \
   	" P52xxCtrl		CONFIG_ARCH_P52 \
	  sp_CN9414 		CONFIG_ARCH_SPIPE" P52xxCtrl

  if [ "$CONFIG_ARCH_P52" = "y" ]; then
  choice ' P52xx board implementation'	\
	"IAD_EVM		CONFIG_IAD_EVM \
	 JSCHornet		CONFIG_HORNET" IAD_EVM
  fi
fi
if [ "$CONFIG_ARCH_NETARM" = "y" ]; then
choice ' NET+ARM Processor type' \
   	" NET+15		CONFIG_NETARM_NET15 \
   	  NET+40		CONFIG_NETARM_NET40 \
   	  NET+50		CONFIG_NETARM_NET50" NET+40
fi

bool 'Set flash/sdram size and base addr' CONFIG_SET_MEM_PARAM
if [ "$CONFIG_SET_MEM_PARAM" = "y" ]; then
   hex '(S)DRAM Base Address' DRAM_BASE 0x00800000
   hex '(S)DRAM Size ' DRAM_SIZE 0x00800000
   hex 'FLASH Base Address ' FLASH_MEM_BASE 0x00400000
   hex 'FLASH Size ' FLASH_SIZE 0x00400000
fi

# ARM940T
if [ "$CONFIG_ARCH_CNXT" = "y" ]; then
   define_bool CONFIG_CPU_32 y
   define_bool CONFIG_CPU_26 n
   define_bool CONFIG_CPU_ARM940T y
   define_bool CONFIG_NO_PGT_CACHE y
   define_bool CONFIG_CPU_WITH_CACHE y
   define_bool CONFIG_CPU_WITH_MCR_INSTRUCTION y
if [ "$CONFIG_SET_MEM_PARAM" = "n" ]; then
   define_hex DRAM_BASE 0x00800000
   define_hex DRAM_SIZE 0x00800000
   define_hex FLASH_MEM_BASE 0x00400000
   define_hex FLASH_SIZE 0x00400000
fi

   bool '  ARM940T CPU idle' CONFIG_CPU_ARM940_CPU_IDLE
   bool '  ARM940T I-Cache on' CONFIG_CPU_ARM940_I_CACHE_ON
   bool '  ARM940T D-Cache on' CONFIG_CPU_ARM940_D_CACHE_ON
if [ "$CONFIG_CPU_ARM940_D_CACHE_ON" = "y" ] ; then
   bool '  Force write through caches on ARM940T' CONFIG_CPU_ARM940_WRITETHROUGH
fi
fi


if [ "$CONFIG_ARCH_DSC21" = "y" ]; then
   define_bool CONFIG_CPU_ARM710 y
   define_bool CONFIG_CPU_32 y
   define_bool CONFIG_CPU_26 n
   define_bool CONFIG_NO_PGT_CACHE y
   define_bool CONFIG_CPU_WITH_CACHE y
   define_bool CONFIG_CPU_WITH_MCR_INSTRUCTION y
   if [ "$CONFIG_SET_MEM_PARAM" = "n" ]; then
   define_hex DRAM_BASE 0x08000000
   define_hex DRAM_SIZE 0x00200000
   define_hex FLASH_MEM_BASE 0x08400000
   define_hex FLASH_SIZE 0x00200000
   fi
   define_bool CONFIG_DUMMY_CONSOLE y
fi

if [ "$CONFIG_ARCH_SWARM" = "y" ]; then
#  define_bool CONFIG_CPU_ARM610 y
   define_bool CONFIG_CPU_32 y
   define_bool CONFIG_CPU_26 n
   define_bool CONFIG_CPU_32v3 y
   define_bool CONFIG_CPU_ARM7V3 y
   define_bool CONFIG_NO_PGT_CACHE y
   define_bool CONFIG_CPU_WITH_MCR_INSTRUCTION y
   define_hex FLASH_MEM_BASE 0x00000000
   define_hex FLASH_SIZE 0x00100000
fi

if [ "$CONFIG_ARCH_ATMEL" = "y" ]; then
   define_bool CONFIG_NO_PGT_CACHE y
   define_bool CONFIG_CPU_ARM710 y
   define_bool CONFIG_CPU_32 y
   define_bool CONFIG_CPU_32v4 y
   define_bool CONFIG_CPU_WITH_CACHE n
   define_bool CONFIG_CPU_WITH_MCR_INSTRUCTION n
   define_bool CONFIG_SERIAL_ATMEL y
   
   bool 'Serial Console' CONFIG_SERIAL_ATMEL_CONSOLE

   if [ "$CONFIG_SET_MEM_PARAM" = "n" ]; then
   	define_hex DRAM_BASE 0x01000000
        define_hex DRAM_SIZE 0x00600000
        define_hex FLASH_MEM_BASE 0x01600000
   	define_hex FLASH_SIZE 0x00200000
   fi
	
    hex 'Memory mapped 16-bit io base' CONFIG_MEM16_BASE 0x03000000
    hex 'Memory mapped 8-bit io base' CONFIG_MEM8_BASE 0x03000000
    hex '16-bit io base' CONFIG_IO16_BASE 0x02000000
    hex '8-bit io base' CONFIG_IO8_BASE 0x02000000
	
   choice ' Atmel CPU' \
   	" AT91x40		CONFIG_CPU_AT91X40 \
	  AT91x63 		CONFIG_CPU_AT91X63" AT91x40

   bool 'Atmel Kernel-Debug hack' CONFIG_ATMEL_DEBUG
   if [ "$CONFIG_ATMEL_DEBUG" = "y" ]; then
	hex 'Debug buffer address' AT91_DEBUG_BASE 0x01400000
   fi
fi

if [ "$CONFIG_ARCH_NETARM" = "y" ]; then
   define_bool CONFIG_CPU_ARM710 y
   define_bool CONFIG_CPU_ARM7TDMI y
   define_bool CONFIG_CPU_32 y
   define_bool CONFIG_CPU_26 n
   define_bool CONFIG_CPU_WITH_CACHE y
   define_bool CONFIG_CPU_WITH_MCR_INSTRUCTION n
   define_bool CONFIG_NO_PGT_CACHE y   
   if [ "$CONFIG_NETARM_NET40" = "y" ]; then
      bool 'NET+ARM NET+40 Rev2' CONFIG_NETARM_NET40_REV2
      if [ "$CONFIG_NETARM_NET40_REV2" = "n" ]; then
         bool 'NET+ARM NET+40 Rev4' CONFIG_NETARM_NET40_REV4
      fi
      bool 'NET+ARM PLL Bypass Patch' CONFIG_NETARM_PLL_BYPASS
      bool 'NET+ARM EMLIN Board' CONFIG_NETARM_EMLIN
   fi
#  default memory configuration for Net40 and EMLIN boards
   if [ "$CONFIG_SET_MEM_PARAM" = "n" ]; then
      define_hex DRAM_BASE 0x00000000
      define_hex FLASH_MEM_BASE 0x10000000
      if [ "$CONFIG_NETARM_EMLIN" = "y" ]; then
         define_hex DRAM_SIZE 0x01000000
         define_hex FLASH_SIZE 0x00200000
      fi
      if [ "$CONFIG_NETARM_EMLIN" = "n" ]; then
         define_hex DRAM_SIZE 0x02000000
         define_hex FLASH_SIZE 0x00800000
	 define_bool CONFIG_NETARM_EEPROM y   
      fi
   fi
fi

if [ "$CONFIG_ARCH_SAMSUNG" = "y" ]; then
   choice 'Board Implementation' \
   "S3C4530-HEI	CONFIG_BOARD_EVS3C4530HEI \
   S3C4510-SNDS100    CONFIG_BOARD_SNDS100" SNDS100 
fi

if [ "$CONFIG_BOARD_EVS3C4530HEI" = "y" ]; then
    define_string CONFIG_CPU_NAME "S3C4530A01-Q"
    bool ' Enable uCbootloader support' CONFIG_UCBOOTSTRAP
    define_bool CONFIG_CPU_S3C4530      y
    define_bool CONFIG_CPU_ARM710       y
    define_bool CONFIG_CPU_32           y
    define_bool CONFIG_CPU_26           n
    define_bool CONFIG_NO_PGT_CACHE     y
    define_bool CONFIG_CPU_WITH_CACHE   y
    define_bool CONFIG_CPU_WITH_MCR_INSTRUCTION n
    define_int  CONFIG_ARM_CLK          50000000
    define_hex  DRAM_BASE               0x00000000
    define_hex  DRAM_SIZE               0x007F0000
    define_hex  FLASH_MEM_BASE          0x01000000
    define_hex  FLASH_SIZE              0x00200000
    define_hex  FLASH1_MEM_BASE         0x01200000
    define_hex  FLASH1_SIZE             0x00200000
fi

if [ "$CONFIG_BOARD_SNDS100" = "y" ]; then
   define_bool CONFIG_NO_PGT_CACHE y
   define_bool CONFIG_CPU_32 y
   define_bool CONFIG_CPU_26 n
   define_bool CONFIG_CPU_ARM710 y
   define_bool CONFIG_CPU_WITH_CACHE y
   define_bool CONFIG_CPU_WITH_MCR_INSTRUCTION n
   define_bool CONFIG_SERIAL_SAMSUNG y
   define_hex DRAM_BASE 0x00000000
   define_hex DRAM_SIZE 0x00800000
   define_hex FLASH_MEM_BASE 0x01000000
   define_hex FLASH_SIZE 0x00200000
fi

if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
   define_bool CONFIG_NO_PGT_CACHE y
   define_bool CONFIG_CPU_ARM740T y
   define_bool CONFIG_CPU_32 y
   define_bool CONFIG_CPU_WITH_CACHE y
   define_bool CONFIG_CPU_WITH_MCR_INSTRUCTION y
   define_hex DRAM_BASE 0
   define_hex DRAM_SIZE 0x04000000
   define_hex FLASH_MEM_BASE 0x25000000
   define_hex FLASH_SIZE 0x02000000
fi
endmenu

#------------------------------------------------------------------------------
#                             G e n e r a l
#------------------------------------------------------------------------------
mainmenu_option next_comment
comment 'General setup'
source drivers/pci/Config.in
bool 'Support hot-pluggable devices' CONFIG_HOTPLUG
if [ "$CONFIG_HOTPLUG" = "y" ]; then
   source drivers/pcmcia/Config.in
else
   define_bool CONFIG_PCMCIA n
fi
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'Reduced memory footprint' CONFIG_REDUCED_MEMORY
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
tristate 'NWFPE math emulation' CONFIG_NWFPE
choice 'Kernel core (/proc/kcore) format' \
	"ELF		CONFIG_KCORE_ELF	\
	 A.OUT		CONFIG_KCORE_AOUT" ELF
define_bool CONFIG_BINFMT_FLAT y
define_bool CONFIG_KERNEL_ELF y

if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   bool 'Power Management support' CONFIG_PM
fi

if [ "$CONFIG_CPU_32" = "y" ]; then
   tristate 'RISC OS personality' CONFIG_ARTHUR
fi
if [ "$CONFIG_ARCH_EBSA110" = "y" -o \
     "$CONFIG_ARCH_SA1100" = "y" -o \
     "$CONFIG_ARCH_CLPS7500" = "y" -o \
     "$CONFIG_ARCH_PERSONAL_SERVER" = "y" -o \
     "$CONFIG_ARCH_CATS" = "y" -o \
     "$CONFIG_ARCH_ATMEL" = "y" ]; then
   string 'Default kernel command string' CONFIG_CMDLINE ""
fi
if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
     "$CONFIG_ARCH_EBSA110" = "y" -o   \
     "$CONFIG_ARCH_EBSA285" = "y" -o   \
     "$CONFIG_ARCH_CO285" = "y" -o     \
     "$CONFIG_ARCH_SA1100" = "y" ]; then
   bool 'Timer and CPU usage LEDs' CONFIG_LEDS
   if [ "$CONFIG_LEDS" = "y" ]; then
      if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
	   "$CONFIG_ARCH_EBSA285" = "y" -o   \
	   "$CONFIG_ARCH_CO285" = "y" -o     \
	   "$CONFIG_ARCH_SA1100" = "y" ]; then
         bool '  Timer LED' CONFIG_LEDS_TIMER
         bool '  CPU usage LED' CONFIG_LEDS_CPU
      fi
   fi
   if [ "$CONFIG_ARCH_EBSA110" = "y" ]; then
      define_bool CONFIG_LEDS_TIMER y
   fi
fi
if [ "$CONFIG_CPU_32" = "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
   bool 'Kernel-mode alignment trap handler' CONFIG_ALIGNMENT_TRAP
fi

if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
   bool 'PCI support' CONFIG_PCI_INTEGRATOR
   define_bool CONFIG_PCI $CONFIG_PCI_INTEGRATOR
fi

endmenu
#------------------------------------------------------------------------------
#                           N e t    D e v i c e s
#------------------------------------------------------------------------------
if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
   mainmenu_option next_comment
   comment 'Network device support'
   bool 'Network device support?' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then
      source drivers/net/Config.in
   fi
   endmenu
   source net/ax25/Config.in
   source net/irda/Config.in
fi
#------------------------------------------------------------------------------
#                               A T E / I D E
#------------------------------------------------------------------------------
mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_IDE_MODES n
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
#------------------------------------------------------------------------------
#                                  S C S I
#------------------------------------------------------------------------------
mainmenu_option next_comment
comment 'SCSI support'
tristate 'SCSI support?' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
   source drivers/scsi/Config.in
fi
endmenu
#------------------------------------------------------------------------------
#                                  I S D N
#------------------------------------------------------------------------------
mainmenu_option next_comment
comment 'ISDN subsystem'
tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
   source drivers/isdn/Config.in
fi
endmenu
#------------------------------------------------------------------------------
#                              C o n s o l e
#------------------------------------------------------------------------------
if [ "$CONFIG_VT" = "y" ]; then
   mainmenu_option next_comment
   comment 'Console drivers'
   if [ "$CONFIG_ARCH_ACORN" != "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
      bool 'VGA text console' CONFIG_VGA_CONSOLE
   fi
   bool 'Support Frame buffer devices' CONFIG_FB
   source drivers/video/Config.in
   endmenu
fi

#------------------------------------------------------------------------------
#                        M i s c    D r i v e r s
#------------------------------------------------------------------------------
source drivers/parport/Config.in
source drivers/mtd/Config.in
source drivers/pnp/Config.in
source drivers/block/Config.in
source fs/Config.in
source drivers/char/Config.in
source drivers/usb/Config.in
source drivers/ieee1394/Config.in
source drivers/message/i2o/Config.in
#------------------------------------------------------------------------------
#                     K e r n e l    H a c k i n g
#------------------------------------------------------------------------------
mainmenu_option next_comment
comment 'Kernel hacking'

define_bool CONFIG_FRAME_POINTER y
bool 'Find REVISITS' CONFIG_REVISIT
bool 'Verbose kernel error messages' CONFIG_DEBUG_ERRORS
bool 'Verbose user fault messages' CONFIG_DEBUG_USER
bool 'Include debugging information in kernel binary' CONFIG_DEBUG_INFO
dep_bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ $CONFIG_VT
if [ "$CONFIG_CPU_26" = "y" ]; then
   bool 'Disable pgtable cache' CONFIG_NO_PGT_CACHE
fi
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   bool 'Kernel low-level debugging functions' CONFIG_DEBUG_LL
   if [ "$CONFIG_DEBUG_LL" = "y" ]; then
      if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
         bool 'Kernel low-level debugging messages via footbridge serial port' CONFIG_DEBUG_DC21285_PORT
      fi
   fi
   bool 'Non power-of-2 kernel allocator (EXPERIMENTAL)' CONFIG_CONTIGUOUS_PAGE_ALLOC
   dep_bool '  include /proc/mem_map' CONFIG_MEM_MAP $CONFIG_CONTIGUOUS_PAGE_ALLOC
fi
endmenu