mainmenu_name "Linux/MIPS Kernel Configuration" mainmenu_option next_comment comment 'Code maturity level options' bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL endmenu mainmenu_option next_comment comment 'Loadable module support' bool 'Enable loadable module support' CONFIG_MODULES if [ "$CONFIG_MODULES" = "y" ]; then bool ' Set version information on all module symbols' CONFIG_MODVERSIONS bool ' Kernel module loader' CONFIG_KMOD fi endmenu # # Keep these alphabetically sorted # mainmenu_option next_comment comment 'Machine selection' dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL dep_bool 'Support for Alchemy Db1000 board' CONFIG_MIPS_DB1000 $CONFIG_MIPS32 dep_bool 'Support for Alchemy Db1100 board' CONFIG_MIPS_DB1100 $CONFIG_MIPS32 dep_bool 'Support for Alchemy Db1500 board' CONFIG_MIPS_DB1500 $CONFIG_MIPS32 dep_bool 'Support for Alchemy PB1000 board' CONFIG_MIPS_PB1000 $CONFIG_MIPS32 if [ "$CONFIG_MIPS_PB1000" = "y" ]; then bool ' Support for PCI AUTO Config' CONFIG_PCI_AUTO fi dep_bool 'Support for Alchemy PB1100 board' CONFIG_MIPS_PB1100 $CONFIG_MIPS32 dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32 dep_bool 'Support for BAGET MIPS series (EXPERIMENTAL)' CONFIG_BAGET_MIPS $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL bool 'Support for CASIO CASSIOPEIA E-10/15/55/65' CONFIG_CASIO_E55 dep_bool 'Support for Cobalt Server (EXPERIMENTAL)' CONFIG_MIPS_COBALT $CONFIG_EXPERIMENTAL if [ "$CONFIG_MIPS32" = "y" ]; then bool 'Support for DECstations' CONFIG_DECSTATION else dep_bool 'Support for DECstations (EXPERIMENTAL)' CONFIG_DECSTATION $CONFIG_EXPERIMENTAL fi dep_bool 'Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)' CONFIG_MIPS_EV64120 $CONFIG_EXPERIMENTAL if [ "$CONFIG_MIPS_EV64120" = "y" ]; then bool ' Enable Second PCI (PCI1)' CONFIG_EVB_PCI1 choice ' Galileo Chip Clock' \ "75 CONFIG_SYSCLK_75 \ 83.3 CONFIG_SYSCLK_83 \ 100 CONFIG_SYSCLK_100" 83.3 fi dep_bool 'Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)' CONFIG_MIPS_EV96100 $CONFIG_EXPERIMENTAL bool 'Support for Globespan IVR board' CONFIG_MIPS_IVR bool 'Support for Hewlett Packard LaserJet board' CONFIG_HP_LASERJET bool 'Support for IBM WorkPad z50' CONFIG_IBM_WORKPAD bool 'Support for LASAT Networks platforms' CONFIG_LASAT if [ "$CONFIG_LASAT" = "y" ]; then tristate ' PICVUE LCD display driver' CONFIG_PICVUE dep_tristate ' PICVUE LCD display driver /proc interface' CONFIG_PICVUE_PROC $CONFIG_PICVUE bool ' DS1603 RTC driver' CONFIG_DS1603 bool ' LASAT sysctl interface' CONFIG_LASAT_SYSCTL fi bool 'Support for ITE 8172G board' CONFIG_MIPS_ITE8172 if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then bool ' Support for older IT8172 (Rev C)' CONFIG_IT8172_REVC fi bool 'Support for MIPS Atlas board' CONFIG_MIPS_ATLAS bool 'Support for MIPS Magnum 4000' CONFIG_MIPS_MAGNUM_4000 bool 'Support for MIPS Malta board' CONFIG_MIPS_MALTA dep_bool 'Support for MIPS SEAD board (EXPERIMENTAL)' CONFIG_MIPS_SEAD $CONFIG_EXPERIMENTAL bool 'Support for Momentum Ocelot board' CONFIG_MOMENCO_OCELOT bool 'Support for Momentum Ocelot-G board' CONFIG_MOMENCO_OCELOT_G dep_bool 'Support for NEC DDB Vrc-5074 (EXPERIMENTAL)' CONFIG_DDB5074 $CONFIG_EXPERIMENTAL bool 'Support for NEC DDB Vrc-5476' CONFIG_DDB5476 bool 'Support for NEC DDB Vrc-5477' CONFIG_DDB5477 if [ "$CONFIG_DDB5477" = "y" ]; then int ' bus frequency (in kHZ, 0 for auto-detect)' CONFIG_DDB5477_BUS_FREQUENCY 0 fi bool 'Support for NEC Osprey board' CONFIG_NEC_OSPREY #@@@@@ bool 'Support for TOA-DKK TCS-8000 board' CONFIG_TOADKK_TCS8000 #@@@@@ bool 'Support for NEC Eagle/Hawk board' CONFIG_NEC_EAGLE if [ "$CONFIG_NEC_EAGLE" = "y" ]; then tristate ' NEC VRC4173 support' CONFIG_VRC4173 fi bool 'Support for Olivetti M700-10' CONFIG_OLIVETTI_M700 dep_bool 'Support for Philips Nino (EXPERIMENTAL)' CONFIG_NINO $CONFIG_MIPS32 $CONFIG_EXPERIMENTAL if [ "$CONFIG_NINO" = "y" ]; then choice 'Nino Model Number' \ "Model-300/301/302/319 CONFIG_NINO_4MB \ Model-200/210/312/320/325/350/390 CONFIG_NINO_8MB \ Model-500/510 CONFIG_NINO_16MB" Model-200 fi bool 'Support for SGI IP22 (Indy/Indigo2)' CONFIG_SGI_IP22 dep_bool 'Support for SGI-IP27 (Origin200/2000)' CONFIG_SGI_IP27 $CONFIG_MIPS64 if [ "$CONFIG_SGI_IP27" = "y" ]; then bool ' IP27 N-Mode' CONFIG_SGI_SN0_N_MODE bool ' Discontiguous Memory Support' CONFIG_DISCONTIGMEM bool ' NUMA Support' CONFIG_NUMA bool ' Mapped kernel support' CONFIG_MAPPED_KERNEL bool ' Kernel text replication support' CONFIG_REPLICATE_KTEXT bool ' Exception handler replication support' CONFIG_REPLICATE_EXHANDLERS define_bool CONFIG_SMP_CAPABLE y #bool ' IP27 XXL' CONFIG_SGI_SN0_XXL fi dep_bool 'Support for SGI-IP32 (O2) (EXPERIMENTAL)' CONFIG_SGI_IP32 $CONFIG_EXPERIMENTAL dep_bool 'Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)' CONFIG_SIBYTE_SB1xxx_SOC $CONFIG_EXPERIMENTAL if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then choice ' BCM1xxx SOC-based board' \ "BCM91250A-SWARM CONFIG_SIBYTE_SWARM \ BCM91250E-Sentosa CONFIG_SIBYTE_SENTOSA \ BCM91120C-CRhine CONFIG_SIBYTE_CRHINE \ BCM91120x-Carmel CONFIG_SIBYTE_CARMEL \ BCM91125C-CRhone CONFIG_SIBYTE_CRHONE \ BCM91125E-Rhone CONFIG_SIBYTE_RHONE \ Other CONFIG_SIBYTE_UNKNOWN" CONFIG_SIBYTE_SWARM if [ "$CONFIG_SIBYTE_UNKNOWN" = "y" ]; then choice ' BCM1xxx SOC Type' \ "BCM91250 CONFIG_SIBYTE_SB1250 \ BCM91120 CONFIG_SIBYTE_BCM1120 \ BCM91125 CONFIG_SIBYTE_BCM1125 \ BCM91125H CONFIG_SIBYTE_BCM1125H" CONFIG_SIBYTE_SB1250 unset CONFIG_SIBYTE_BOARD else define_bool CONFIG_SIBYTE_BOARD y if [ "$CONFIG_SIBYTE_SWARM" = "y" -o \ "$CONFIG_SIBYTE_SENTOSA" = "y" ]; then define_bool CONFIG_SIBYTE_SB1250 y unset CONFIG_SIBYTE_BCM1120 unset CONFIG_SIBYTE_BCM1125 unset CONFIG_SIBYTE_BCM1125H fi if [ "$CONFIG_SIBYTE_CRHINE" = "y" -o \ "$CONFIG_SIBYTE_CARMEL" = "y" ]; then define_bool CONFIG_SIBYTE_BCM1120 y unset CONFIG_SIBYTE_SB1250 unset CONFIG_SIBYTE_BCM1125 unset CONFIG_SIBYTE_BCM1125H fi if [ "$CONFIG_SIBYTE_CRHONE" = "y" -o \ "$CONFIG_SIBYTE_RHONE" = "y" ]; then define_bool CONFIG_SIBYTE_BCM1125H y unset CONFIG_SIBYTE_SB1250 unset CONFIG_SIBYTE_BCM1120 unset CONFIG_SIBYTE_BCM1125 fi fi if [ "$CONFIG_SIBYTE_BCM1120" = "y" -o \ "$CONFIG_SIBYTE_BCM1125" = "y" -o \ "$CONFIG_SIBYTE_BCM1125H" = "y" ]; then define_bool CONFIG_SIBYTE_BCM112X y choice 'BCM1xxx Pass' \ "Hybrid CONFIG_CPU_SB1_PASS_2 \ A1-A2 CONFIG_CPU_SB1_PASS_3" A1-A2 else unset CONFIG_SIBYTE_BCM112X choice 'BCM1250 Pass' \ "Pass1 CONFIG_CPU_SB1_PASS_1 \ A3-A10 CONFIG_CPU_SB1_PASS_2 \ B0-B3 CONFIG_CPU_SB1_PASS_2_2" A3-A10 fi bool ' Booting from CFE' CONFIG_SIBYTE_CFE dep_bool ' Use firmware console' CONFIG_SIBYTE_CFE_CONSOLE $CONFIG_SIBYTE_CFE if [ "$CONFIG_SIBYTE_CFE" = "n" ]; then define_bool CONFIG_SIBYTE_STANDALONE y int ' Memory size (in megabytes)' CONFIG_SIBYTE_STANDALONE_RAM_SIZE 32 fi bool ' Support for SB1/SOC profiling - SB1/SCD perf counters' CONFIG_SIBYTE_SB1250_PROF bool ' Support for ZBbus profiling' CONFIG_BCM1250_TBPROF if [ "$CONFIG_SIBYTE_SB1250" = "y" -o \ "$CONFIG_SIBYTE_BCM1125" = "y" -o \ "$CONFIG_SIBYTE_BCM1125H" = "y" ]; then bool ' Support for BCM1250/BCM1125 onchip PCI controller' CONFIG_PCI fi if [ "$CONFIG_SIBYTE_SB1250" = "y" -o \ "$CONFIG_SIBYTE_BCM1125H" = "y" ]; then if [ "$CONFIG_PCI" = "y" ]; then define_bool CONFIG_SIBYTE_HAS_LDT y fi fi if [ "$CONFIG_SIBYTE_SWARM" = "y" -o \ "$CONFIG_SIBYTE_CARMEL" = "y" ]; then define_bool CONFIG_SIBYTE_GENBUS_IDE y fi if [ "$CONFIG_SIBYTE_SB1250" = "y" ]; then if [ "$CONFIG_SIBYTE_STANDALONE" != "y" ]; then define_bool CONFIG_SMP_CAPABLE y fi fi fi bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI dep_bool 'Support for Toshiba JMR-TX3927 board' CONFIG_TOSHIBA_JMR3927 $CONFIG_MIPS32 bool 'Support for Victor MP-C303/304' CONFIG_VICTOR_MPC30X if [ "$CONFIG_VICTOR_MPC30X" = "y" ]; then tristate ' NEC VRC4173 support' CONFIG_VRC4173 fi bool 'Support for ZAO Networks Capcella' CONFIG_ZAO_CAPCELLA dep_bool 'High Memory Support' CONFIG_HIGHMEM $CONFIG_MIPS32 define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n # # Select some configuration options automatically based on user selections. # if [ "$CONFIG_ACER_PICA_61" = "y" ]; then define_bool CONFIG_ARC32 y define_bool CONFIG_I8259 y define_bool CONFIG_ISA y define_bool CONFIG_MIPS_JAZZ y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y define_bool CONFIG_OLD_TIME_C y fi if [ "$CONFIG_CASIO_E55" = "y" ]; then define_bool CONFIG_CPU_VR41XX y define_bool CONFIG_IRQ_CPU y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_VR41XX_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_ISA y define_bool CONFIG_DUMMY_KEYB y define_bool CONFIG_SCSI n fi if [ "$CONFIG_MIPS_PB1000" = "y" ]; then define_bool CONFIG_CPU_AU1X00 y define_bool CONFIG_CPU_AU1000 y define_bool CONFIG_PCI y define_bool CONFIG_NEW_PCI y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y define_bool CONFIG_AU1X00_USB_DEVICE y fi if [ "$CONFIG_MIPS_PB1100" = "y" ]; then define_bool CONFIG_CPU_AU1X00 y define_bool CONFIG_CPU_AU1100 y define_bool CONFIG_PCI y define_bool CONFIG_PCI_AUTO n define_bool CONFIG_NEW_PCI y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y define_bool CONFIG_AU1X00_USB_DEVICE y fi if [ "$CONFIG_MIPS_PB1500" = "y" ]; then define_bool CONFIG_CPU_AU1X00 y define_bool CONFIG_CPU_AU1500 y define_bool CONFIG_PCI y define_bool CONFIG_NEW_PCI y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y define_bool CONFIG_AU1X00_USB_DEVICE y fi if [ "$CONFIG_MIPS_DB1000" = "y" ]; then define_bool CONFIG_CPU_AU1X00 y define_bool CONFIG_CPU_AU1000 y # CONFIG_PCI needed for USB define_bool CONFIG_PCI y define_bool CONFIG_NEW_PCI y define_bool CONFIG_PCI_AUTO n define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y define_bool CONFIG_SWAP_IO_SPACE y fi if [ "$CONFIG_MIPS_DB1500" = "y" ]; then define_bool CONFIG_CPU_AU1X00 y define_bool CONFIG_CPU_AU1500 y define_bool CONFIG_NEW_IRQ y define_bool CONFIG_PCI y define_bool CONFIG_NEW_PCI y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y fi if [ "$CONFIG_MIPS_DB1100" = "y" ]; then define_bool CONFIG_CPU_AU1X00 y define_bool CONFIG_CPU_AU1100 y define_bool CONFIG_NEW_IRQ y define_bool CONFIG_PCI y define_bool CONFIG_NEW_PCI y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y define_bool CONFIG_SWAP_IO_SPACE y fi if [ "$CONFIG_MIPS_COBALT" = "y" ]; then define_bool CONFIG_COBALT_LCD y define_bool CONFIG_I8259 y define_bool CONFIG_PCI y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NONCOHERENT_IO y fi if [ "$CONFIG_DECSTATION" = "y" ]; then define_bool CONFIG_BOOT_ELF32 y define_bool CONFIG_IRQ_CPU y define_int CONFIG_L1_CACHE_SHIFT 4 define_bool CONFIG_NONCOHERENT_IO y fi if [ "$CONFIG_MIPS_EV64120" = "y" ]; then define_bool CONFIG_PCI y define_bool CONFIG_ISA n define_bool CONFIG_MIPS_GT64120 y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_OLD_TIME_C y fi if [ "$CONFIG_MIPS_EV96100" = "y" ]; then define_bool CONFIG_PCI y define_bool CONFIG_MIPS_GT96100 y define_bool CONFIG_NEW_PCI y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y fi if [ "$CONFIG_MIPS_IVR" = "y" ]; then define_bool CONFIG_PCI y define_bool CONFIG_PC_KEYB y define_bool CONFIG_NEW_PCI y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_IT8172_CIR y define_bool CONFIG_NEW_TIME_C y fi if [ "$CONFIG_HP_LASERJET" = "y" ]; then define_bool CONFIG_IRQ_CPU y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NEW_PCI y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PCI y #not yet define_bool CONFIG_PCI_AUTO y fi if [ "$CONFIG_IBM_WORKPAD" = "y" ]; then define_bool CONFIG_CPU_VR41XX y define_bool CONFIG_IRQ_CPU y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_VR41XX_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_ISA y define_bool CONFIG_DUMMY_KEYB y define_bool CONFIG_SCSI n fi if [ "$CONFIG_LASAT" = "y" ]; then define_bool CONFIG_BOARD_SCACHE y define_bool CONFIG_R5000_CPU_SCACHE y define_bool CONFIG_PCI y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NEW_IRQ y fi if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then define_bool CONFIG_PCI y define_bool CONFIG_IT8712 y define_bool CONFIG_PC_KEYB y define_bool CONFIG_NEW_PCI y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_IT8172_CIR y define_bool CONFIG_NEW_TIME_C y fi if [ "$CONFIG_MIPS_ATLAS" = "y" ]; then define_bool CONFIG_BOOT_ELF32 y define_int CONFIG_L1_CACHE_SHIFT 5 define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PCI y define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y fi if [ "$CONFIG_MIPS_MAGNUM_4000" = "y" -o \ "$CONFIG_OLIVETTI_M700" = "y" ]; then define_bool CONFIG_ARC32 y define_bool CONFIG_I8259 y define_bool CONFIG_ISA y define_bool CONFIG_FB y define_bool CONFIG_FB_G364 y define_bool CONFIG_MIPS_JAZZ y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y define_bool CONFIG_OLD_TIME_C y fi if [ "$CONFIG_MIPS_MALTA" = "y" ]; then define_bool CONFIG_BOOT_ELF32 y define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y define_bool CONFIG_I8259 y define_int CONFIG_L1_CACHE_SHIFT 5 define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y define_bool CONFIG_PC_KEYB y define_bool CONFIG_PCI y fi if [ "$CONFIG_MIPS_SEAD" = "y" ]; then define_int CONFIG_L1_CACHE_SHIFT 5 define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PCI n fi if [ "$CONFIG_MOMENCO_OCELOT" = "y" ]; then define_bool CONFIG_PCI y define_bool CONFIG_SYSCLK_100 y define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_OLD_TIME_C y fi if [ "$CONFIG_MOMENCO_OCELOT_G" = "y" ]; then define_bool CONFIG_PCI y define_bool CONFIG_SYSCLK_100 y define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_OLD_TIME_C y fi if [ "$CONFIG_DDB5074" = "y" ]; then define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y define_bool CONFIG_I8259 y define_bool CONFIG_ISA y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PCI y define_bool CONFIG_PC_KEYB y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_IRQ_CPU y define_bool CONFIG_NEW_PCI y fi if [ "$CONFIG_DDB5476" = "y" ]; then define_bool CONFIG_ISA y define_bool CONFIG_PCI y define_bool CONFIG_PC_KEYB y define_bool CONFIG_IRQ_CPU y define_bool CONFIG_I8259 y define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y define_bool CONFIG_NEW_PCI y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NONCOHERENT_IO y fi if [ "$CONFIG_DDB5477" = "y" ]; then define_bool CONFIG_PCI y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_IRQ_CPU y define_bool CONFIG_NEW_PCI y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_DUMMY_KEYB y define_bool CONFIG_I8259 y fi if [ "$CONFIG_NEC_OSPREY" = "y" ]; then define_bool CONFIG_VR4181 y define_bool CONFIG_IRQ_CPU y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_DUMMY_KEYB y define_bool CONFIG_SCSI n fi #@@@@@ if [ "$CONFIG_TOADKK_TCS8000" = "y" ]; then define_bool CONFIG_CPU_VR41XX y define_bool CONFIG_VR4181A y define_bool CONFIG_NEW_IRQ y define_bool CONFIG_IRQ_CPU y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_VR41XX_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_ISA y define_bool CONFIG_PCI y define_bool CONFIG_NEW_PCI y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_DUMMY_KEYB y fi #@@@@@ if [ "$CONFIG_NEC_EAGLE" = "y" ]; then define_bool CONFIG_CPU_VR41XX y define_bool CONFIG_IRQ_CPU y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_VR41XX_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_ISA n define_bool CONFIG_PCI y define_bool CONFIG_NEW_PCI y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_DUMMY_KEYB y define_bool CONFIG_SCSI n fi if [ "$CONFIG_NINO" = "y" ]; then define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y fi if [ "$CONFIG_SGI_IP22" = "y" ]; then define_bool CONFIG_ARC32 y define_bool CONFIG_ARC_MEMORY y define_bool CONFIG_ARC_PROMLIB y define_bool CONFIG_BOARD_SCACHE y define_bool CONFIG_BOOT_ELF32 y define_bool CONFIG_SWAP_IO_SPACE_W n define_bool CONFIG_SWAP_IO_SPACE_L y define_bool CONFIG_IRQ_CPU y define_int CONFIG_L1_CACHE_SHIFT 5 define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y define_bool CONFIG_SGI y fi if [ "$CONFIG_SGI_IP27" = "y" ]; then define_bool CONFIG_BOOT_ELF64 y define_bool CONFIG_ARC64 y define_int CONFIG_L1_CACHE_SHIFT 7 #define_bool CONFIG_MAPPED_PCI_IO y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_PCI y define_bool CONFIG_QL_ISP_A64 y fi if [ "$CONFIG_SGI_IP32" = "y" ]; then define_bool CONFIG_ARC_MEMORY y define_bool CONFIG_ARC_PROMLIB y define_bool CONFIG_ARC32 y define_bool CONFIG_BOARD_SCACHE y define_bool CONFIG_R5000_CPU_SCACHE y define_bool CONFIG_BOOT_ELF32 y define_int CONFIG_L1_CACHE_SHIFT 5 define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y define_bool CONFIG_PCI y fi if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_DUMMY_KEYB y define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y define_bool CONFIG_BOOT_ELF32 y fi if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then define_bool CONFIG_ARC32 y define_bool CONFIG_ARC_MEMORY y define_bool CONFIG_ARC_PROMLIB y define_bool CONFIG_I8259 y define_bool CONFIG_ISA y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_OLD_TIME_C y define_bool CONFIG_PC_KEYB y define_bool CONFIG_PCI y fi if [ "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then define_bool CONFIG_TOSHIBA_BOARDS y define_bool CONFIG_PCI y define_bool CONFIG_NEW_PCI y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y define_bool CONFIG_PC_KEYB y fi if [ "$CONFIG_VICTOR_MPC30X" = "y" ]; then define_bool CONFIG_CPU_VR41XX y define_bool CONFIG_IRQ_CPU y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_VR41XX_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_ISA n define_bool CONFIG_PCI y define_bool CONFIG_NEW_PCI y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_DUMMY_KEYB y define_bool CONFIG_SCSI n fi if [ "$CONFIG_ZAO_CAPCELLA" = "y" ]; then define_bool CONFIG_CPU_VR41XX y define_bool CONFIG_IRQ_CPU y define_bool CONFIG_NEW_TIME_C y define_bool CONFIG_VR41XX_TIME_C y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_ISA n define_bool CONFIG_PCI y define_bool CONFIG_NEW_PCI y define_bool CONFIG_PCI_AUTO y define_bool CONFIG_DUMMY_KEYB y define_bool CONFIG_SCSI n fi if [ "$CONFIG_MIPS_AU1000" != "y" ]; then define_bool CONFIG_MIPS_AU1000 n fi endmenu mainmenu_option next_comment comment 'CPU selection' choice 'CPU type' \ "MIPS32 CONFIG_CPU_MIPS32 \ MIPS64 CONFIG_CPU_MIPS64 \ R3000 CONFIG_CPU_R3000 \ R39XX CONFIG_CPU_TX39XX \ R41xx CONFIG_CPU_VR41XX \ R4300 CONFIG_CPU_R4300 \ R4x00 CONFIG_CPU_R4X00 \ R49XX CONFIG_CPU_TX49XX \ R5000 CONFIG_CPU_R5000 \ R5432 CONFIG_CPU_R5432 \ R6000 CONFIG_CPU_R6000 \ R52xx CONFIG_CPU_NEVADA \ R8000 CONFIG_CPU_R8000 \ R10000 CONFIG_CPU_R10000 \ RM7000 CONFIG_CPU_RM7000 \ SB1 CONFIG_CPU_SB1" R4x00 if [ "$CONFIG_SMP_CAPABLE" = "y" ]; then bool ' Multi-Processing support' CONFIG_SMP fi if [ "$CONFIG_CPU_MIPS32" = "y" ]; then define_bool CONFIG_CPU_HAS_PREFETCH y bool ' Support for Virtual Tagged I-cache' CONFIG_VTAG_ICACHE fi if [ "$CONFIG_CPU_MIPS64" = "y" ]; then define_bool CONFIG_CPU_HAS_PREFETCH y bool ' Support for Virtual Tagged I-cache' CONFIG_VTAG_ICACHE fi if [ "$CONFIG_CPU_RM7000" = "y" ]; then define_bool CONFIG_CPU_HAS_PREFETCH y fi if [ "$CONFIG_CPU_SB1" = "y" ]; then # SB1 Pass-specific options if [ "$CONFIG_CPU_SB1_PASS_1" = "y" ]; then define_bool CONFIG_SB1_PASS_1_WORKAROUNDS y fi if [ "$CONFIG_CPU_SB1_PASS_2" = "y" ]; then define_bool CONFIG_SB1_PASS_2_WORKAROUNDS y define_bool CONFIG_SB1_PASS_2_1_WORKAROUNDS y else # Avoid prefetches on Pass 2 (before 2.2) bool ' Enable prefetches' CONFIG_CPU_HAS_PREFETCH fi if [ "$CONFIG_CPU_SB1_PASS_2_2" = "y" ]; then # XXXKW for now, let 2.2 use same WORKAROUNDS flag as pre-2.2 define_bool CONFIG_SB1_PASS_2_WORKAROUNDS y fi define_bool CONFIG_VTAG_ICACHE y fi if [ "$CONFIG_CPU_R4X00" = "y" -o \ "$CONFIG_CPU_R5000" = "y" -o \ "$CONFIG_CPU_RM7000" = "y" -o \ "$CONFIG_CPU_R10000" = "y" -o \ "$CONFIG_CPU_SB1" = "y" -o \ "$CONFIG_CPU_MIPS32" = "y" -o \ "$CONFIG_CPU_MIPS64" = "y" ]; then dep_bool ' Support for 64-bit physical address space' CONFIG_64BIT_PHYS_ADDR $CONFIG_MIPS32 fi dep_bool 'Override CPU Options' CONFIG_CPU_ADVANCED $CONFIG_MIPS32 if [ "$CONFIG_CPU_ADVANCED" = "y" ]; then bool ' ll/sc Instructions available' CONFIG_CPU_HAS_LLSC bool ' lld/scd Instructions available' CONFIG_CPU_HAS_LLDSCD bool ' Writeback Buffer available' CONFIG_CPU_HAS_WB else if [ "$CONFIG_CPU_R3000" = "y" -o \ "$CONFIG_CPU_VR41XX" = "y" -o \ "$CONFIG_CPU_TX39XX" = "y" ]; then if [ "$CONFIG_DECSTATION" = "y" ]; then define_bool CONFIG_CPU_HAS_LLSC n define_bool CONFIG_CPU_HAS_LLDSCD n define_bool CONFIG_CPU_HAS_WB y else define_bool CONFIG_CPU_HAS_LLSC n define_bool CONFIG_CPU_HAS_LLDSCD n define_bool CONFIG_CPU_HAS_WB n fi else if [ "$CONFIG_CPU_MIPS32" = "y" ]; then define_bool CONFIG_CPU_HAS_LLSC y define_bool CONFIG_CPU_HAS_LLDSCD n define_bool CONFIG_CPU_HAS_WB n else define_bool CONFIG_CPU_HAS_LLSC y define_bool CONFIG_CPU_HAS_LLDSCD y define_bool CONFIG_CPU_HAS_WB n fi fi fi if [ "$CONFIG_CPU_R3000" = "y" ]; then define_bool CONFIG_CPU_HAS_SYNC n else define_bool CONFIG_CPU_HAS_SYNC y fi bool 'Kernel Execute-In-Place(XIP) on ROM support' CONFIG_XIP_KERNEL if [ "$CONFIG_XIP_KERNEL" = "y" ]; then hex ' Kernel .text physical address' CONFIG_XIP_PHYS_ADDR 0 fi bool 'Real-Time Hardware Abstraction Layer support' CONFIG_RTHAL dep_bool ' Reil-Time Scheduling support' CONFIG_RTSCHED $CONFIG_RTHAL dep_bool 'Preemptible Kernel support' CONFIG_PREEMPT $CONFIG_NEW_IRQ endmenu # # Choose endianess of code to generate. It's a frequent trap for users so the # config file tries it's best to choose the right endianess for those systems # where we know about their endianess. We only ask the user for systems # known to be bi-endian; for those systems the defconfig file should defaults # to the common endianess used for that system. # mainmenu_option next_comment comment 'General setup' if [ "$CONFIG_ACER_PICA_61" = "y" -o \ "$CONFIG_CASIO_E55" = "y" -o \ "$CONFIG_DDB5074" = "y" -o \ "$CONFIG_DDB5476" = "y" -o \ "$CONFIG_DDB5477" = "y" -o \ "$CONFIG_DECSTATION" = "y" -o \ "$CONFIG_HP_LASERJET" = "y" -o \ "$CONFIG_IBM_WORKPAD" = "y" -o \ "$CONFIG_LASAT" = "y" -o \ "$CONFIG_MIPS_COBALT" = "y" -o \ "$CONFIG_MIPS_ITE8172" = "y" -o \ "$CONFIG_MIPS_IVR" = "y" -o \ "$CONFIG_MIPS_PB1000" = "y" -o \ "$CONFIG_MIPS_PB1100" = "y" -o \ "$CONFIG_MIPS_PB1500" = "y" -o \ "$CONFIG_NEC_OSPREY" = "y" -o \ "$CONFIG_NEC_EAGLE" = "y" -o \ "$CONFIG_NINO" = "y" -o \ "$CONFIG_OLIVETTI_M700" = "y" -o \ "$CONFIG_SNI_RM200_PCI" = "y" -o \ "$CONFIG_VICTOR_MPC30X" = "y" -o \ "$CONFIG_ZAO_CAPCELLA" = "y" ]; then define_bool CONFIG_CPU_LITTLE_ENDIAN y else if [ "$CONFIG_BAGET_MIPS" = "y" -o \ "$CONFIG_MIPS_EV64120" = "y" -o \ "$CONFIG_MIPS_EV96100" = "y" -o \ "$CONFIG_MOMENCO_OCELOT" = "y" -o \ "$CONFIG_MOMENCO_OCELOT_G" = "y" -o \ "$CONFIG_SGI_IP22" = "y" -o \ "$CONFIG_SGI_IP27" = "y" -o \ "$CONFIG_SGI_IP32" = "y" -o \ "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then define_bool CONFIG_CPU_LITTLE_ENDIAN n else bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN fi fi if [ "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then bool 'DS1742 BRAM/RTC support' CONFIG_RTC_DS1742 fi if [ "$CONFIG_CPU_LITTLE_ENDIAN" = "n" ]; then bool 'Include IRIX binary compatibility' CONFIG_BINFMT_IRIX bool 'Include forward keyboard' CONFIG_FORWARD_KEYBOARD fi if [ "$CONFIG_CPU_R10000" = "y" ]; then dep_bool 'Support for large 64-bit configurations' CONFIG_MIPS_INSANE_LARGE $CONFIG_MIPS64 fi #if [ "$CONFIG_ARC32" = "y" ]; then # bool 'ARC console support' CONFIG_ARC_CONSOLE #fi if [ "$CONFIG_SGI_IP22" = "y" ]; then dep_bool 'Indigo-2 (IP22) EISA bus support' CONFIG_IP22_EISA $CONFIG_EXPERIMENTAL fi if [ "$CONFIG_IP22_EISA" = "y" ]; then define_bool CONFIG_EISA y bool ' ISA bus support' CONFIG_ISA fi bool 'Networking support' CONFIG_NET if [ "$CONFIG_PCI" != "y" ]; then define_bool CONFIG_PCI n fi source drivers/pci/Config.in if [ "$CONFIG_ISA" != "y" ]; then define_bool CONFIG_ISA n define_bool CONFIG_EISA n else define_bool CONFIG_EISA y fi dep_bool 'TURBOchannel support' CONFIG_TC $CONFIG_DECSTATION #dep_bool 'Access.Bus support' CONFIG_ACCESSBUS $CONFIG_TC define_bool CONFIG_MCA n define_bool CONFIG_SBUS n bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG if [ "$CONFIG_HOTPLUG" = "y" ] ; then source drivers/pcmcia/Config.in source drivers/hotplug/Config.in else define_bool CONFIG_PCMCIA n define_bool CONFIG_HOTPLUG_PCI n fi bool 'System V IPC' CONFIG_SYSVIPC bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT bool 'Sysctl support' CONFIG_SYSCTL define_bool CONFIG_KCORE_ELF y define_bool CONFIG_KCORE_AOUT n define_bool CONFIG_BINFMT_AOUT n tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF dep_bool 'Kernel support for Linux/MIPS 32-bit binary compatibility' CONFIG_MIPS32_COMPAT $CONFIG_MIPS64 dep_bool 'Kernel support for o32 binaries' CONFIG_MIPS32_O32 $CONFIG_MIPS32_COMPAT dep_bool 'Kernel support for n32 binaries' CONFIG_MIPS32_N32 $CONFIG_MIPS32_COMPAT if [ "$CONFIG_MIPS32_O32" = "y" -o \ "$CONFIG_MIPS32_N32" = "y" ]; then define_bool CONFIG_BINFMT_ELF32 y else define_bool CONFIG_BINFMT_ELF32 n fi tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC dep_bool 'Power Management support (EXPERIMENTAL)' CONFIG_PM $CONFIG_EXPERIMENTAL $CONFIG_MIPS_AU1000 endmenu source drivers/mtd/Config.in source drivers/parport/Config.in source drivers/pnp/Config.in source drivers/block/Config.in if [ "$CONFIG_BLK_DEV_INITRD" = "y" ]; then mainmenu_option next_comment comment 'MIPS initrd options' bool ' Embed root filesystem ramdisk into the kernel' CONFIG_EMBEDDED_RAMDISK if [ "$CONFIG_EMBEDDED_RAMDISK" = "y" ]; then string ' Filename of gziped ramdisk image' CONFIG_EMBEDDED_RAMDISK_IMAGE ramdisk.gz fi endmenu fi source drivers/md/Config.in source crypto/Config.in if [ "$CONFIG_NET" = "y" ]; then source net/Config.in fi source drivers/telephony/Config.in mainmenu_option next_comment comment 'ATA/IDE/MFM/RLL support' tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE if [ "$CONFIG_IDE" != "n" ]; then source drivers/ide/Config.in else define_bool CONFIG_BLK_DEV_IDE_MODES n define_bool CONFIG_BLK_DEV_HD n fi endmenu mainmenu_option next_comment comment 'SCSI support' tristate 'SCSI support' CONFIG_SCSI if [ "$CONFIG_SCSI" != "n" ]; then source drivers/scsi/Config.in fi endmenu if [ "$CONFIG_PCI" = "y" ]; then source drivers/message/i2o/Config.in fi if [ "$CONFIG_NET" = "y" ]; then mainmenu_option next_comment comment 'Network device support' bool 'Network device support' CONFIG_NETDEVICES if [ "$CONFIG_NETDEVICES" = "y" ]; then source drivers/net/Config.in if [ "$CONFIG_ATM" = "y" ]; then source drivers/atm/Config.in fi fi endmenu fi source net/ax25/Config.in source net/irda/Config.in if [ "$CONFIG_NET" != "n" ]; then mainmenu_option next_comment comment 'ISDN subsystem' tristate 'ISDN support' CONFIG_ISDN if [ "$CONFIG_ISDN" != "n" ]; then source drivers/isdn/Config.in fi endmenu fi if [ "$CONFIG_ISA" = "y" ]; then mainmenu_option next_comment comment 'Old CD-ROM drivers (not SCSI, not IDE)' bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then source drivers/cdrom/Config.in fi endmenu fi # # input before char - char/joystick depends on it. As does USB. # source drivers/input/Config.in source drivers/char/Config.in #source drivers/misc/Config.in if [ "$CONFIG_SGI_IP22" = "y" ]; then mainmenu_option next_comment comment 'SGI Character devices' if [ "$CONFIG_VT" = "y" ]; then tristate 'SGI Newport Console support' CONFIG_SGI_NEWPORT_CONSOLE if [ "$CONFIG_SGI_NEWPORT_CONSOLE" = "y" ]; then define_bool CONFIG_FONT_8x16 y fi define_bool CONFIG_DUMMY_CONSOLE y fi endmenu fi source fs/Config.in source drivers/media/Config.in if [ "$CONFIG_VT" = "y" ]; then mainmenu_option next_comment comment 'Console drivers' bool 'VGA text console' CONFIG_VGA_CONSOLE if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then tristate 'MDA text console (dual-headed) (EXPERIMENTAL)' CONFIG_MDA_CONSOLE source drivers/video/Config.in fi endmenu fi mainmenu_option next_comment comment 'Sound' tristate 'Sound card support' CONFIG_SOUND if [ "$CONFIG_SOUND" != "n" ]; then source drivers/sound/Config.in fi endmenu if [ "$CONFIG_SGI_IP22" = "y" ]; then source drivers/sgi/Config.in fi source drivers/usb/Config.in source net/bluetooth/Config.in mainmenu_option next_comment comment 'Kernel hacking' bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE bool 'Enable run-time debugging' CONFIG_DEBUG if [ "$CONFIG_AU1X00_UART" = "y" -o "$CONFIG_ZS" = "y" -o "$CONFIG_SIBYTE_SB1xxx_SOC" = "y"]; then dep_bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG $CONFIG_DEBUG dep_bool ' Console output to GDB' CONFIG_GDB_CONSOLE $CONFIG_REMOTE_DEBUG fi if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then dep_bool 'Compile for Corelis Debugger' CONFIG_SB1XXX_CORELIS $CONFIG_DEBUG fi bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ if [ "$CONFIG_SMP" != "y" ]; then bool 'Run uncached' CONFIG_MIPS_UNCACHED fi endmenu source lib/Config.in