#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
mainmenu_name "uClinux/MIPS (w/o MMU) Kernel Configuration"
#mainmenu_name "Linux Kernel Configuration"

define_bool CONFIG_MIPS y
define_bool CONFIG_SMP n
define_bool CONFIG_UCLINUX y

define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y


mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Machine selection'
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   bool 'Support for Galileo EV96100 Evaluation board' CONFIG_MIPS_EV96100
   bool 'Support for Galileo EV64120 Evaluation board' CONFIG_MIPS_EV64120
   if [ "$CONFIG_MIPS_EV64120" = "y" ]; then
		  bool 'Enable Second PCI (PCI1)' CONFIG_EVB_PCI1
      choice 'Galileo Chip Clock' \
        "75 CONFIG_SYSCLK_75\
         83.3 CONFIG_SYSCLK_83\
         100 CONFIG_SYSCLK_100" CONFIG_SYSCLK_83
   fi
   bool 'Support for MIPS Atlas board' CONFIG_MIPS_ATLAS
   bool 'Support for MIPS Malta board' CONFIG_MIPS_MALTA
   bool 'Support for Brecis MSP5000 - EVM board' CONFIG_BRECIS
fi
bool 'Support for Momentum Ocelot board' CONFIG_MOMENCO_OCELOT
bool 'Support for ITE 8172G board' CONFIG_MIPS_ITE8172
   if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
       bool '    Support for older IT8172 (Rev C)' CONFIG_IT8172_REVC
       bool '    Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
       if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
	   define_bool CONFIG_IT8172_CIR y
       else
           bool '    Enable PS2 Keyboard Support ' CONFIG_PC_KEYB
       fi
       bool '    Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
       bool '    Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1
   fi
   bool 'Support for Globespan IVR board' CONFIG_MIPS_IVR
   if [ "$CONFIG_MIPS_IVR" = "y" ]; then
       bool '    Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
       if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
	   define_bool CONFIG_IT8172_CIR y
       fi
       bool '    Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
   fi

#
# Select some configuration options automatically for certain systems.
#
unset CONFIG_ARC32
unset CONFIG_BOARD_SCACHE
unset CONFIG_HAVE_STD_PC_SERIAL_PORT
unset CONFIG_I8259
unset CONFIG_ISA
unset CONFIG_PCI
unset CONFIG_MIPS_JAZZ
unset CONFIG_SWAP_IO_SPACE
unset CONFIG_VIDEO_G364
unset CONFIG_PC_KEYB
unset CONFIG_SERIAL_SPACE4

define_bool CONFIG_MCA n
define_bool CONFIG_SBUS n

if [ "$CONFIG_MIPS_EV96100" = "y" ]; then
   define_bool CONFIG_PCI y
   define_bool CONFIG_MIPS_GT96100 y
   define_bool CONFIG_SWAP_IO_SPACE y
fi
if [ "$CONFIG_MIPS_EV64120" = "y" ]; then
   define_bool CONFIG_PCI y
   define_bool CONFIG_ISA n
   define_bool CONFIG_MIPS_GT64120 y
fi

if [ "$CONFIG_MIPS_ATLAS" = "y" ]; then
   define_bool CONFIG_PCI y
   define_bool CONFIG_SWAP_IO_SPACE y
fi
if [ "$CONFIG_MIPS_MALTA" = "y" ]; then
   define_bool CONFIG_I8259 y
   define_bool CONFIG_PCI y
   define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y
   define_bool CONFIG_SWAP_IO_SPACE y
fi
if [ "$CONFIG_BRECIS" = "y" ]; then
   define_bool CONFIG_SERIAL_SPACE4 y 
fi
if [ "$CONFIG_MOMENCO_OCELOT" = "y" ]; then
   define_bool CONFIG_PCI y
   define_bool CONFIG_SYSCLK_100 y
   define_bool CONFIG_SWAP_IO_SPACE y
fi
if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
   define_bool CONFIG_PCI y
   define_bool CONFIG_IT8712 y
   define_bool CONFIG_PC_KEYB y
fi
if [ "$CONFIG_MIPS_IVR" = "y" ]; then
   define_bool CONFIG_PCI y
fi

if [ "$CONFIG_ISA" != "y" ]; then
   define_bool CONFIG_ISA n
   define_bool CONFIG_EISA n
else
   define_bool CONFIG_EISA y
fi

if [ "$CONFIG_PCI" != "y" ]; then
   define_bool CONFIG_PCI n
fi

if [ "$CONFIG_I8259" != "y" ]; then
   define_bool CONFIG_I8259 n
fi
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'CPU selection'

choice 'CPU type' \
	"R3000 CONFIG_CPU_R3000	\
	 R3912 CONFIG_CPU_R3912	\
	 R6000 CONFIG_CPU_R6000	\
	 R4300 CONFIG_CPU_R4300	\
	 R4x00 CONFIG_CPU_R4X00	\
	 R5000 CONFIG_CPU_R5000	\
         R5432 CONFIG_CPU_R5432 \
	 RM7000 CONFIG_CPU_RM7000 \
	 R52xx CONFIG_CPU_NEVADA \
	 R8000 CONFIG_CPU_R8000	\
	 R10000 CONFIG_CPU_R10000 \
	 MIPS32_4kc_4km_4kp_4kec_4ksc CONFIG_CPU_MIPS32" R4x00

bool 'Override CPU Options' CONFIG_CPU_ADVANCED

#if [ "$CONFIG_CPU_4KM" = "y" ]; then
#   define_bool CONFIG_CPU_MIPS32 y
#fi

if [ "$CONFIG_CPU_ADVANCED" = "y" ]; then
   bool '  ll/sc Instructions available' CONFIG_CPU_HAS_LLSC
   bool '  Writeback Buffer available' CONFIG_CPU_HAS_WB
else
   if [ "$CONFIG_CPU_R3000" = "y" ]; then
      define_bool CONFIG_CPU_HAS_LLSC n
      define_bool CONFIG_CPU_HAS_WB n
   else
      if [ "$CONFIG_CPU_R3912" = "y" ]; then
	 define_bool CONFIG_CPU_HAS_LLSC n
	 define_bool CONFIG_CPU_HAS_WB n
      else
	 define_bool CONFIG_CPU_HAS_LLSC y
	 define_bool CONFIG_CPU_HAS_WB n
      fi
   fi
fi
endmenu

mainmenu_option next_comment
comment 'General setup'
bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
bool 'Kernel floating-point emulation' CONFIG_MIPS_FPU_EMULATOR

if [ "$CONFIG_PROC_FS" = "y" ]; then
   choice 'Kernel core (/proc/kcore) format' \
        "ELF            CONFIG_KCORE_ELF        \
         A.OUT          CONFIG_KCORE_AOUT" ELF
fi
define_bool CONFIG_ELF_KERNEL y

if [ "$CONFIG_CPU_LITTLE_ENDIAN" = "n" ]; then
   bool 'Include IRIX binary compatibility' CONFIG_BINFMT_IRIX 
   bool 'Include forward keyboard' CONFIG_FORWARD_KEYBOARD 
fi

if [ "$CONFIG_ARC32" = "y" ]; then
   bool 'ARC console support' CONFIG_ARC_CONSOLE
fi

tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
tristate 'Kernel support for flat binaries' CONFIG_BINFMT_FLAT
if [ "$CONFIG_BINFMT_FLAT" != "n" ]; then
   bool '    Enable ZFLAT support' CONFIG_BINFMT_ZFLAT
fi                                                                                
bool 'Networking support' CONFIG_NET

if [ "$CONFIG_PCI" = "y" ]; then
    source drivers/pci/Config.in
fi

bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL

source drivers/parport/Config.in

endmenu

if [ "$CONFIG_ISA" = "y" ]; then
   source drivers/pnp/Config.in
fi

if [ "$CONFIG_HOTPLUG" = "y" ] ; then
   source drivers/pcmcia/Config.in
else
   define_bool CONFIG_PCMCIA n
fi

source drivers/mtd/Config.in

source drivers/block/Config.in

source drivers/md/Config.in

source crypto/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
fi

source drivers/telephony/Config.in

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'
    
tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
    
if [ "$CONFIG_IDE" != "n" ]; then
   source drivers/ide/Config.in
else
   define_bool CONFIG_BLK_DEV_IDE_MODES n
   define_bool CONFIG_BLK_DEV_HD n
fi
endmenu


mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
   source drivers/scsi/Config.in
fi
endmenu

source drivers/i2o/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then

      source drivers/net/Config.in

      if [ "$CONFIG_ATM" = "y" ]; then
         source drivers/atm/Config.in
      fi
   fi
   endmenu
fi

if [ "$CONFIG_ISA" = "y" -o "$CONFIG_PCI" = "y" ]; then
   mainmenu_option next_comment
   comment 'ISDN subsystem'

   if [ "$CONFIG_NET" != "n" ]; then
      tristate 'ISDN support' CONFIG_ISDN
      if [ "$CONFIG_ISDN" != "n" ]; then
	 source drivers/isdn/Config.in
      fi
   fi
   endmenu

   mainmenu_option next_comment
   comment 'Old CD-ROM drivers (not SCSI, not IDE)'

   bool 'Support non-SCSI/IDE/ATAPI drives' CONFIG_CD_NO_IDESCSI
   if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
      source drivers/cdrom/Config.in
   fi
   endmenu
fi

source drivers/char/Config.in

source drivers/media/Config.in

source fs/Config.in

if [ "$CONFIG_VT" = "y" ]; then
   mainmenu_option next_comment

   comment 'Console drivers'
      if [ "$CONFIG_DECSTATION" != "y" ]; then
	 bool 'VGA text console' CONFIG_VGA_CONSOLE
      fi
      bool 'Support for frame buffer devices' CONFIG_FB
      source drivers/video/Config.in
   endmenu
fi

mainmenu_option next_comment
comment 'Sound'

tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
   source drivers/sound/Config.in
fi
endmenu

source drivers/usb/Config.in
source drivers/input/Config.in

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
if [ "$CONFIG_MODULES" = "y" ]; then
   bool ' Build fp execption handler module' CONFIG_MIPS_FPE_MODULE
fi
if [ "$CONFIG_SERIAL" = "y" ]; then
  bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
fi
if [ "$CONFIG_SERIAL" = "y" ]; then
  bool 'Low-level debugging' CONFIG_LL_DEBUG
fi
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
if [ "$CONFIG_SMP" != "y" ]; then
   bool 'Run uncached' CONFIG_MIPS_UNCACHED
fi
endmenu