/* * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 1999 by Helge Deller * Copyright 1999 SuSE GmbH (Philipp Rumpf) * Copyright 1999 Philipp Rumpf (prumpf@tux.org) * * Initial Version 04-23-1999 by Helge Deller */ #include /* for CONFIG_SMP */ #include #include #include #include .level 1.1 .section .initcall.init .align 4 .export __initcall_start __initcall_start: .export __initcall_end __initcall_end: .export __setup_start __setup_start: .export __setup_end __setup_end: .data .export boot_args boot_args: .word 0 /* arg0 */ .word 0 /* arg1 */ .word 0 /* arg2 */ .word 0 /* arg3 */ .text .align 4 .import init_task_union,data .import $global$ /* forward declaration */ .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ .import start_parisc,code /* then enable VM and go here */ .export stext .export _stext,data /* Kernel want it this way! */ _stext: stext: .proc .callinfo /* Make sure sr4-sr7 are set to zero for the kernel address space */ mtsp %r0,%sr4 mtsp %r0,%sr5 mtsp %r0,%sr6 mtsp %r0,%sr7 /* Clear BSS (shouldn't the boot loader do this?) */ .import _edata,data .import _end,data ldil L%PA(_edata),%r3 ldo R%PA(_edata)(%r3),%r3 ldil L%PA(_end),%r4 ldo R%PA(_end)(%r4),%r4 $bss_loop: cmpb,<<,n %r3,%r4,$bss_loop stb,ma %r0,1(%r3) /* Save away the arguments the boot loader passed in (32 bit args) */ ldil L%PA(boot_args),%r1 ldo R%PA(boot_args)(%r1),%r1 stw,ma %arg0,4(%r1) stw,ma %arg1,4(%r1) stw,ma %arg2,4(%r1) stw,ma %arg3,4(%r1) /* Initialize startup VM. Just map first 8 MB of memory */ ldil L%PA(pg0),%r1 ldo R%PA(pg0)(%r1),%r1 ldo _PAGE_TABLE(%r1),%r3 ldil L%PA(swapper_pg_dir),%r4 ldo R%PA(swapper_pg_dir)(%r4),%r4 mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ #if (__PAGE_OFFSET != 0x10000000UL) Error! Code below (the next two stw's) needs to be changed #endif stw %r3,0x100(%r4) /* Hardwired 0x1... kernel Vaddr start*/ ldo 0x1000(%r3),%r3 stw %r3,0x104(%r4) ldo _PAGE_KERNEL(%r0),%r3 /* Hardwired 0 phys addr start */ $pgt_fill_loop: stwm %r3,4(%r1) ldo 0x1000(%r3),%r3 bb,>= %r3,8,$pgt_fill_loop nop /* Load the return address...er...crash 'n burn */ copy %r0,%r2 /* And the RFI Target address too */ ldil L%start_kernel,%r11 ldo R%start_kernel(%r11),%r11 /* And the initial task pointer */ ldil L%init_task_union,%r6 ldo R%init_task_union(%r6),%r6 mtctl %r6,%cr30 /* And the stack pointer too */ ldo TASK_SZ_ALGN(%r6),%sp /* And the interrupt stack */ ldil L%interrupt_stack,%r6 ldo R%interrupt_stack(%r6),%r6 mtctl %r6,%cr31 #ifdef CONFIG_SMP /* Set the smp rendevous address into page zero. ** It would be safer to do this in init_smp_config() but ** it's just way easier to deal with here because ** of 64-bit function ptrs and the address is local to this file. */ ldil L%PA(smp_slave_stext),%r10 ldo R%PA(smp_slave_stext)(%r10),%r10 stw %r10,0x10(%r0) /* MEM_RENDEZ */ stw %r0,0x28(%r0) /* MEM_RENDEZ_HI - assume addr < 4GB */ /* FALLTHROUGH */ .procend /* ** Code Common to both Monarch and Slave processors. ** Entry: ** %r11 must contain RFI target address. ** %r25/%r26 args to pass to target function ** %r2 in case rfi target decides it didn't like something ** ** Caller must init: SR4-7, %sp, %r10, %cr24/25, */ common_stext: .proc .callinfo #else /* Clear PDC entry point - we won't use it */ stw %r0,0x10(%r0) /* MEM_RENDEZ */ stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */ #endif /* PARANOID: clear user scratch/user space SR's */ mtsp %r0,%sr0 mtsp %r0,%sr1 mtsp %r0,%sr2 mtsp %r0,%sr3 /* Initialize Protection Registers */ mtctl %r0,%cr8 mtctl %r0,%cr9 mtctl %r0,%cr12 mtctl %r0,%cr13 /* Initialize the global data pointer */ ldil L%$global$,%dp ldo R%$global$(%dp),%dp /* * Set up our interrupt table. HPMCs might not work after this! * * We need to install the correct iva for PA1.1 or PA2.0. The * following short sequence of instructions can determine this * (without being illegal on a PA1.1 machine). */ ldi 32,%r10 mtctl %r10,%cr11 .level 2.0 mfctl,w %cr11,%r10 .level 1.1 comib,<>,n 0,%r10,$is_pa20 ldil L%PA(fault_vector_11),%r10 b $install_iva ldo R%PA(fault_vector_11)(%r10),%r10 $is_pa20: ldil L%PA(fault_vector_20),%r10 ldo R%PA(fault_vector_20)(%r10),%r10 $install_iva: mtctl %r10,%cr14 /* Disable Q bit so we can load the iia queue */ rsm PSW_SM_Q,%r0 /* kernel PSW: * - no interruptions except HPMC and TOC (which are handled by PDC) * - Q bit set (IODC / PDC interruptions) * - big-endian * - virtually mapped */ ldil L%KERNEL_PSW,%r10 ldo R%KERNEL_PSW(%r10),%r10 mtctl %r10,%ipsw /* Set the space pointers for the post-RFI world ** Clear the two-level IIA Space Queue, effectively setting ** Kernel space. */ mtctl %r0,%cr17 mtctl %r0,%cr17 /* Load RFI target into PC queue */ mtctl %r11,%cr18 ldo 4(%r11),%r11 mtctl %r11,%cr18 /* Jump to hyperspace */ rfi nop .procend #ifdef CONFIG_SMP .import smp_init_current_idle_task,data .import smp_callin,code smp_callin_rtn: .proc .callinfo break 1,1 /* Break if returned from start_secondary */ nop nop .procend /*************************************************************************** * * smp_slave_stext is executed by all non-monarch Processors when the Monarch * pokes the slave CPUs in smp.c:smp_boot_cpus(). * * Once here, registers values are initialized in order to branch to virtual * mode. Once all available/eligible CPUs are in virtual mode, all are * released and start out by executing their own idle task. *****************************************************************************/ smp_slave_stext: .proc .callinfo /* ** Initialize Space registers */ mtsp %r0,%sr4 mtsp %r0,%sr5 mtsp %r0,%sr6 mtsp %r0,%sr7 /* Initialize the SP - monarch sets up smp_init_current_idle_task */ ldil L%PA(smp_init_current_idle_task),%sp ldo R%PA(smp_init_current_idle_task)(%sp),%sp ldw 0(%sp),%sp /* load task address */ mtctl %sp,%cr30 /* store in cr30 */ addil L%TASK_SZ_ALGN,%sp /* stack is above task */ ldo R%TASK_SZ_ALGN(%r1),%sp /* point CPU to kernel page tables */ ldil L%PA(swapper_pg_dir),%r4 ldo R%PA(swapper_pg_dir)(%r4),%r4 mtctl %r4,%cr24 /* Initialize kernel root pointer */ mtctl %r4,%cr25 /* Initialize user root pointer */ /* Load RFI *return* address in case smp_callin bails */ ldil L%smp_callin_rtn,%r2 ldo R%smp_callin_rtn(%r2),%r2 /* Load RFI target address. */ ldil L%smp_callin,%r11 ldo R%smp_callin(%r11),%r11 /* ok...common code can handle the rest */ b common_stext nop .procend #endif /* CONFIG_SMP */ .data .align 4 .export $global$,data .type $global$,@object .size $global$,4 $global$: .word 0