# BK Id: %F% %I% %G% %U% %#%
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
define_bool CONFIG_UID16 n
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK n
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM y
define_bool CONFIG_HAVE_DEC_LOCK y

mainmenu_name "Linux/PowerPC Kernel Configuration"

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'Platform support'
define_bool CONFIG_PPC y
define_bool CONFIG_PPC32 y
choice 'Processor Type'	\
	"6xx/7xx/74xx/8260	CONFIG_6xx	\
	 4xx			CONFIG_4xx	\
	 POWER3               	CONFIG_POWER3	\
	 POWER4        	        CONFIG_POWER4	\
	 8xx			CONFIG_8xx"	6xx

if [ "$CONFIG_6xx" = "y" ]; then
  bool 'MPC8260 CPM Support' CONFIG_8260
fi

if [ "$CONFIG_POWER3" = "y" -o "$CONFIG_POWER4" = "y" ]; then
  define_bool CONFIG_PPC64BRIDGE y
  define_bool CONFIG_ALL_PPC y
  define_bool CONFIG_PPC_ISATIMER y
fi

if [ "$CONFIG_6xx" = "y" -o "$CONFIG_POWER3" = "y" -o \
     "$CONFIG_POWER4" = "y" ]; then
  define_bool CONFIG_PPC_STD_MMU y
else
  define_bool CONFIG_PPC_STD_MMU n
fi

if [ "$CONFIG_8260" = "y" ]; then
  define_bool CONFIG_SERIAL_CONSOLE y
  bool 'Support for EST8260' CONFIG_EST8260
fi

if [ "$CONFIG_4xx" = "y" ]; then
    choice 'Machine Type'			\
	"Oak			CONFIG_OAK 	\
	 Walnut			CONFIG_WALNUT"	Oak
fi

if [ "$CONFIG_8xx" = "y" ]; then
  define_bool CONFIG_SERIAL_CONSOLE y

  choice 'Machine Type'		\
	"RPX-Lite	CONFIG_RPXLITE		\
	 RPX-Classic	CONFIG_RPXCLASSIC	\
	 BSE-IP		CONFIG_BSEIP		\
	 FADS		CONFIG_FADS		\
 	 TQM823L	CONFIG_TQM823L		\
 	 TQM850L	CONFIG_TQM850L		\
 	 TQM855L	CONFIG_TQM855L		\
  	 TQM860L	CONFIG_TQM860L		\
 	 FPS850L	CONFIG_FPS850L		\
  	 TQM860		CONFIG_TQM860		\
 	 SPD823TS	CONFIG_SPD823TS		\
 	 IVMS8		CONFIG_IVMS8		\
	 IVML24		CONFIG_IVML24		\
 	 SM850		CONFIG_SM850		\
	 MBX		CONFIG_MBX		\
	 WinCept	CONFIG_WINCEPT"		RPX-Lite

  if [ "$CONFIG_TQM823L" = "y" -o \
       "$CONFIG_TQM850L" = "y" -o \
       "$CONFIG_FPS850L" = "y" -o \
       "$CONFIG_TQM855L" = "y" -o \
       "$CONFIG_TQM860L" = "y" -o \
       "$CONFIG_SM850"   = "y" ]; then
 	define_bool	CONFIG_TQM8xxL	y
  fi
fi

if [ "$CONFIG_6xx" = "y" -a "$CONFIG_8260" = "n" ]; then
  choice 'Machine Type'		\
	"CHRP/PowerMac/PReP	CONFIG_ALL_PPC		\
  	 Amiga-APUS		CONFIG_APUS		\
	 IBM-Spruce		CONFIG_SPRUCE		\
	 SBS-Palomar4		CONFIG_PAL4		\
	 Synergy-Gemini        	CONFIG_GEMINI"		CHRP/PowerMac/PReP
fi

if [ "$CONFIG_PPC_STD_MMU" != "y" ]; then
  define_bool CONFIG_ALL_PPC n
fi

bool 'Symmetric multi-processing support' CONFIG_SMP
if [ "$CONFIG_SMP" = "y" ]; then
  bool '  Distribute interrupts on all CPUs by default' CONFIG_IRQ_ALL_CPUS
fi

bool 'Kernel Execute-In-Place(XIP) on ROM support' CONFIG_XIP_KERNEL
bool 'Real-Time Hardware Abstraction Layer support' CONFIG_RTHAL
dep_bool '  Real-Time Interrupt Request Handler support' CONFIG_RTIRQ $CONFIG_RTHAL
bool 'Preemptible kernel support' CONFIG_PREEMPT

if [ "$CONFIG_6xx" = "y" -a "$CONFIG_8260" = "n" ];then
  bool 'AltiVec Support' CONFIG_ALTIVEC
  bool 'Thermal Management Support' CONFIG_TAU
  if [ "$CONFIG_TAU" = "y" ]; then
    bool '    Interrupt driven TAU driver (DANGEROUS)' CONFIG_TAU_INT
    bool '    Average high and low temp' CONFIG_TAU_AVERAGE
  fi
  define_bool CONFIG_PPC_ISATIMER y
fi

if [ "$CONFIG_4xx" = "y" -o "$CONFIG_8xx" = "y" ]; then
  bool 'Math emulation' CONFIG_MATH_EMULATION
fi

if [ "$CONFIG_8xx" = "y" -o "$CONFIG_8260" = "y" ]; then
    define_bool CONFIG_EMBEDDEDBOOT y
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

bool 'High memory support (experimental)' CONFIG_HIGHMEM

define_bool CONFIG_ISA n
define_bool CONFIG_EISA n
define_bool CONFIG_SBUS n

# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
define_bool CONFIG_MCA n

if [ "$CONFIG_4xx" = "y" -o "$CONFIG_8260" = "y" ]; then
  define_bool CONFIG_PCI n
else
  if [ "$CONFIG_8xx" = "y" ]; then
     bool 'QSpan PCI' CONFIG_PCI_QSPAN
     define_bool CONFIG_PCI $CONFIG_PCI_QSPAN
  else
     if [ "$CONFIG_APUS" = "y" ]; then
       bool 'PCI for Permedia2' CONFIG_PCI_PERMEDIA
       define_bool CONFIG_PCI $CONFIG_PCI_PERMEDIA
     else
       define_bool CONFIG_PCI y
     fi
  fi
fi

bool 'Networking support' CONFIG_NET
bool 'Sysctl support' CONFIG_SYSCTL
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT

# only elf supported, a.out is not -- Cort
if [ "$CONFIG_PROC_FS" = "y" ]; then
  define_bool CONFIG_KCORE_ELF y
fi
define_bool CONFIG_BINFMT_ELF y
define_bool CONFIG_KERNEL_ELF y
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

source drivers/pci/Config.in

bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG

if [ "$CONFIG_HOTPLUG" = "y" ]; then
  source drivers/pcmcia/Config.in
else
  define_bool CONFIG_PCMCIA n
fi

source drivers/parport/Config.in

if [ "$CONFIG_4xx" != "y" ]; then
  if [ "$CONFIG_APUS" != "y" ]; then
    tristate 'Support for /dev/rtc' CONFIG_PPC_RTC
  else
    bool 'Generic /dev/rtc emulation' CONFIG_GEN_RTC
  fi
fi

if [ "$CONFIG_ALL_PPC" = "y" -a "$CONFIG_POWER3" = "n" ] ; then
  bool 'Workarounds for PPC601 bugs' CONFIG_PPC601_SYNC_FIX
fi

if [ "$CONFIG_ALL_PPC" = "y" ]; then
  bool 'Support for Open Firmware device tree in /proc' CONFIG_PROC_DEVICETREE
  bool 'Support for RTAS (RunTime Abstraction Services) in /proc' CONFIG_PPC_RTAS
  bool 'Support for early boot text console (BootX or OpenFirmware only)' CONFIG_BOOTX_TEXT
  bool 'Support for PReP Residual Data' CONFIG_PREP_RESIDUAL
  dep_bool '  Support for reading of PReP Residual Data in /proc' CONFIG_PROC_PREPRESIDUAL $CONFIG_PREP_RESIDUAL
fi

bool 'Default bootloader kernel arguments' CONFIG_CMDLINE_BOOL
if [ "$CONFIG_CMDLINE_BOOL" = "y" ] ; then
  string 'Initial kernel command string' CONFIG_CMDLINE "console=ttyS0,9600 console=tty0 root=/dev/sda2"
fi

if [ "$CONFIG_APUS" = "y" ]; then
  define_bool CONFIG_FB_CONSOLE y
  define_bool CONFIG_AMIGA y
  define_bool CONFIG_ZORRO y
  define_bool CONFIG_AMIGAMOUSE y
  define_bool CONFIG_ABSTRACT_CONSOLE y
  define_bool CONFIG_FB y
  define_bool CONFIG_MOUSE y
  define_bool CONFIG_BUSMOUSE y
  define_bool CONFIG_APUS_FAST_EXCEPT y

  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    bool 'Amiga 1200/600 PCMCIA support' CONFIG_AMIGA_PCMCIA
  fi

  tristate 'Amiga builtin serial support' CONFIG_AMIGA_BUILTIN_SERIAL
  tristate 'GVP IO-Extender support' CONFIG_GVPIOEXT
  dep_tristate 'GVP IO-Extender parallel printer support' CONFIG_GVPIOEXT_LP $CONFIG_GVPIOEXT
  dep_tristate 'GVP IO-Extender PLIP support' CONFIG_GVPIOEXT_PLIP $CONFIG_GVPIOEXT
  tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
  fi
  if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
    tristate 'Hisoft Whippet PCMCIA serial support' CONFIG_WHIPPET_SERIAL
    tristate 'PCMCIA NE2000 support' CONFIG_APNE
  fi
  if [ "$CONFIG_AMIGA_BUILTIN_SERIAL" = "y" -o "$CONFIG_GVPIOEXT" = "y" -o \
       "$CONFIG_MULTIFACE_III_TTY" = "y" ]; then
    bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
  fi
  bool 'Use power LED as a heartbeat' CONFIG_HEARTBEAT
  bool '/proc/hardware support' CONFIG_PROC_HARDWARE
  source drivers/zorro/Config.in
fi

endmenu
source drivers/mtd/Config.in
source drivers/pnp/Config.in
source drivers/block/Config.in
source drivers/md/Config.in
source crypto/Config.in

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'

tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_IDE_MODES n
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu

mainmenu_option next_comment
comment 'SCSI support'
tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
  source drivers/scsi/Config.in
fi
endmenu

source drivers/ieee1394/Config.in

if [ "$CONFIG_NET" = "y" ]; then
  mainmenu_option next_comment
  comment 'Network device support'

  bool 'Network device support' CONFIG_NETDEVICES
  if [ "$CONFIG_NETDEVICES" = "y" ]; then
    source drivers/net/Config.in
    if [ "$CONFIG_ATM" = "y" ]; then
      source drivers/atm/Config.in
    fi
  fi
  endmenu
fi

source net/ax25/Config.in

source net/irda/Config.in

mainmenu_option next_comment
comment 'ISDN subsystem'

tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
  source drivers/isdn/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'Old CD-ROM drivers (not SCSI, not IDE)'

bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
  source drivers/cdrom/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'Console drivers'
if [ "$CONFIG_4xx" != "y" -a "$CONFIG_8xx" != "y" ]; then
  bool 'Support for VGA Console' CONFIG_VGA_CONSOLE
fi
 source drivers/video/Config.in
if [ "$CONFIG_FB" = "y" -a "$CONFIG_ALL_PPC" = "y" ]; then
  bool 'Backward compatibility mode for Xpmac' CONFIG_FB_COMPAT_XPMAC
fi
endmenu

source drivers/input/Config.in

mainmenu_option next_comment
comment 'Macintosh device drivers'

if [ "$CONFIG_ALL_PPC" = "y" ]; then
  # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
  bool 'Support for CUDA based PowerMacs' CONFIG_ADB_CUDA
  bool 'Support for PMU  based PowerMacs' CONFIG_ADB_PMU
  if [ "$CONFIG_ADB_PMU" = "y" ]; then
    bool '   Power management support for PowerBooks' CONFIG_PMAC_PBOOK
    if [ "$CONFIG_PMAC_PBOOK" = "y" ]; then
      define_bool CONFIG_PM y
      tristate '     APM emulation' CONFIG_PMAC_APM_EMU
    fi
    # made a separate option since backlight may end up beeing used
    # on non-powerbook machines (but only on PMU based ones AFAIK)
    bool '   Backlight control for LCD screens' CONFIG_PMAC_BACKLIGHT
  fi
  bool 'Support for PowerMac floppy' CONFIG_MAC_FLOPPY
  tristate 'Support for PowerMac serial ports' CONFIG_MAC_SERIAL
  if [ "$CONFIG_MAC_SERIAL" = "y" ]; then
    bool '   Support for console on serial port' CONFIG_SERIAL_CONSOLE
  fi
  bool 'Apple Desktop Bus (ADB) support' CONFIG_ADB
  if [ "$CONFIG_ADB" = "y" ]; then
    bool '   Include MacIO (CHRP) ADB driver' CONFIG_ADB_MACIO
    dep_bool '   Use input layer for ADB devices' CONFIG_INPUT_ADBHID $CONFIG_INPUT
    if [ "$CONFIG_INPUT_ADBHID" = "y" ]; then
      bool '     Support for ADB raw keycodes' CONFIG_MAC_ADBKEYCODES
      bool '     Support for mouse button 2+3 emulation' CONFIG_MAC_EMUMOUSEBTN
    else
      bool '   Support for ADB keyboard (old driver)' CONFIG_ADB_KEYBOARD
    fi
  fi
  # This is for drivers/macintosh/mac_hid.o, which is needed if the input
  # layer is used.
  if [ "$CONFIG_INPUT" != "n" ]; then
    define_bool CONFIG_MAC_HID y
  fi
  if [ "$CONFIG_ADB_CUDA" != "n" ]; then
    bool 'Support for ANS LCD display' CONFIG_ANSLCD
  fi
fi
endmenu

source drivers/char/Config.in

source drivers/media/Config.in

source fs/Config.in

mainmenu_option next_comment
comment 'Sound'
tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
  source drivers/sound/dmasound/Config.in
  source drivers/sound/Config.in
fi

endmenu

if [ "$CONFIG_8xx" = "y" ]; then
source arch/ppc/8xx_io/Config.in
fi

if [ "$CONFIG_8260" = "y" ]; then
source arch/ppc/8260_io/Config.in
fi

source drivers/usb/Config.in

source net/bluetooth/Config.in

source lib/Config.in

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Kernel debugging' CONFIG_DEBUG_KERNEL
if [ "$CONFIG_DEBUG_KERNEL" = "y" ]; then
  bool '  Magic SysRq key' CONFIG_MAGIC_SYSRQ
  bool '  Debug high memory support' CONFIG_DEBUG_HIGHMEM
  bool '  Debug memory allocations' CONFIG_DEBUG_SLAB
  if [ "$CONFIG_SMP" = "y" ]; then
    bool '  Spinlock debugging' CONFIG_DEBUG_SPINLOCK
  fi
  bool '  Wait queue debugging' CONFIG_DEBUG_WAITQ
  bool '  Include kgdb kernel debugger' CONFIG_KGDB
  bool '  Include xmon kernel debugger' CONFIG_XMON
  bool '  Include BDI-2000 user context switcher' CONFIG_BDI_SWITCH
  if [ "$CONFIG_KGDB" = "y" -o "$CONFIG_XMON" = "y" \
	-o "$CONFIG_BDI_SWITCH" = "y" ]; then
    bool '    Add any additional compile options' CONFIG_MORE_COMPILE_OPTIONS
    if [ "$CONFIG_MORE_COMPILE_OPTIONS" = "y" ]; then
      string '    Additional compile arguments' CONFIG_COMPILE_OPTIONS "-g -ggdb"
    fi
  fi
fi
endmenu