# $Id: config.in,v 1.111 2001/06/01 08:12:10 davem Exp $
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
mainmenu_name "Linux/SPARC Kernel Configuration"

define_bool CONFIG_UID16 y
define_bool CONFIG_HIGHMEM y

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all symbols for modules' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

define_bool CONFIG_VT y
define_bool CONFIG_VT_CONSOLE y

bool 'Symmetric multi-processing support (does not work on sun4/sun4c)' CONFIG_SMP

# Identify this as a Sparc32 build
define_bool CONFIG_SPARC32 y

# Global things across all Sun machines.
define_bool CONFIG_ISA n
define_bool CONFIG_EISA n
define_bool CONFIG_MCA n
define_bool CONFIG_PCMCIA n
define_bool CONFIG_SBUS y
define_bool CONFIG_SBUSCHAR y
define_bool CONFIG_BUSMOUSE y
define_bool CONFIG_SUN_MOUSE y
define_bool CONFIG_SERIAL y
define_bool CONFIG_SUN_SERIAL y
define_bool CONFIG_SERIAL_CONSOLE y
define_bool CONFIG_SUN_KEYBOARD y
define_bool CONFIG_SUN_CONSOLE y
define_bool CONFIG_SUN_AUXIO y
define_bool CONFIG_SUN_IO y
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n
define_bool CONFIG_SUN_PM y

bool 'Support for SUN4 machines (disables SUN4[CDM] support)' CONFIG_SUN4
if [ "$CONFIG_SUN4" != "y" ]; then
   bool 'Support for PCI and PS/2 keyboard/mouse' CONFIG_PCI
   source drivers/pci/Config.in
else
   define_bool CONFIG_PCI n
fi

tristate 'Openprom tree appears in /proc/openprom' CONFIG_SUN_OPENPROMFS
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
if [ "$CONFIG_PROC_FS" = "y" ]; then
   define_bool CONFIG_KCORE_ELF y
fi
tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
bool 'SunOS binary emulation' CONFIG_SUNOS_EMUL
source drivers/parport/Config.in
dep_tristate '  Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
endmenu

mainmenu_option next_comment
comment 'Console drivers'
bool 'PROM console' CONFIG_PROM_CONSOLE
source drivers/video/Config.in
endmenu

source drivers/mtd/Config.in

if [ "$CONFIG_SUN4" != "y" ]; then
   source drivers/sbus/char/Config.in
   source drivers/sbus/audio/Config.in
fi

mainmenu_option next_comment
comment 'Block devices'

bool 'Normal floppy disk support' CONFIG_BLK_DEV_FD

tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
dep_tristate 'Network block device support' CONFIG_BLK_DEV_NBD $CONFIG_NET

source drivers/md/Config.in

source crypto/Config.in

tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
if [ "$CONFIG_BLK_DEV_RAM" = "y" -o "$CONFIG_BLK_DEV_RAM" = "m" ]; then
	int '   Default RAM disk size' CONFIG_BLK_DEV_RAM_SIZE 4096
fi
dep_bool '  Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD $CONFIG_BLK_DEV_RAM

endmenu

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
fi

# Don't frighten a common SBus user
if [ "$CONFIG_PCI" = "y" ]; then

  mainmenu_option next_comment
  comment 'ATA/IDE/MFM/RLL support'

  tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

  if [ "$CONFIG_IDE" != "n" ]; then
    source drivers/ide/Config.in
  else
    define_bool CONFIG_BLK_DEV_IDE_MODES n
    define_bool CONFIG_BLK_DEV_HD n
  fi
  endmenu
else

  define_bool CONFIG_IDE n
  define_bool CONFIG_BLK_DEV_IDE_MODES n
  define_bool CONFIG_BLK_DEV_HD n
fi

mainmenu_option next_comment
comment 'ISDN subsystem'

tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
   source drivers/isdn/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
   comment 'SCSI support type (disk, tape, CDrom)'

   dep_tristate '  SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI

   if [ "$CONFIG_BLK_DEV_SD" != "n" ]; then
      int  'Maximum number of SCSI disks that can be loaded as modules' CONFIG_SD_EXTRA_DEVS 40
   fi

   dep_tristate '  SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI

   dep_tristate '  SCSI OnStream SC-x0 tape support' CONFIG_CHR_DEV_OSST $CONFIG_SCSI

   dep_tristate '  SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI

   if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
      bool '    Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
      int  'Maximum number of CDROM devices that can be loaded as modules' CONFIG_SR_EXTRA_DEVS 2
   fi

   dep_tristate '  SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI

   comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'

   bool '  Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN

   bool '  Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
   bool '  SCSI logging facility' CONFIG_SCSI_LOGGING

   mainmenu_option next_comment
   comment 'SCSI low-level drivers'

   dep_tristate 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
   dep_tristate 'PTI Qlogic,ISP Driver' CONFIG_SCSI_QLOGICPTI $CONFIG_SCSI
   endmenu
fi
endmenu

source drivers/fc4/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then
      tristate '  Dummy net driver support' CONFIG_DUMMY
      tristate '  Bonding driver support' CONFIG_BONDING
      tristate '  Universal TUN/TAP device driver support' CONFIG_TUN
      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
        if [ "$CONFIG_NETLINK" = "y" ]; then
          tristate '  Ethertap network tap (OBSOLETE)' CONFIG_ETHERTAP
        fi
      fi
      tristate '  PPP (point-to-point protocol) support' CONFIG_PPP
      if [ ! "$CONFIG_PPP" = "n" ]; then
        dep_tristate '  PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP
        dep_tristate '  PPP support for sync tty ports' CONFIG_PPP_SYNC_TTY $CONFIG_PPP
        dep_tristate '  PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP
        dep_tristate '  PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP m
	if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	  dep_tristate '  PPP over Ethernet (EXPERIMENTAL)' CONFIG_PPPOE $CONFIG_PPP
	  if [ "$CONFIG_ATM" = "y" ]; then
	    dep_tristate '  PPP over ATM (EXPERIMENTAL)' CONFIG_PPPOATM $CONFIG_PPP
	  fi
	fi
      fi
      tristate '  SLIP (serial line) support' CONFIG_SLIP
      if [ "$CONFIG_SLIP" != "n" ]; then
	 bool '    CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
	 bool '    Keepalive and linefill' CONFIG_SLIP_SMART
	 bool '    Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
      fi
      tristate '  Sun LANCE support' CONFIG_SUNLANCE
      tristate '  Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	 tristate '  Sun BigMAC 10/100baseT support (EXPERIMENTAL)' CONFIG_SUNBMAC
      fi
      tristate '  Sun QuadEthernet support' CONFIG_SUNQE
      tristate '  MyriCOM Gigabit Ethernet support' CONFIG_MYRI_SBUS
      if [ "$CONFIG_PCI" = "y" ]; then
         tristate '3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX
      fi

#      bool '  FDDI driver support' CONFIG_FDDI
#      if [ "$CONFIG_FDDI" = "y" ]; then
#      fi

      if [ "$CONFIG_ATM" = "y" ]; then
	 source drivers/atm/Config.in
      fi
   fi
   endmenu
fi

# This one must be before the filesystem configs. -DaveM
mainmenu_option next_comment
comment 'Unix98 PTY support'
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
   int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
fi
endmenu

source fs/Config.in

source net/bluetooth/Config.in

mainmenu_option next_comment
comment 'Watchdog'

tristate 'Software watchdog' CONFIG_SOFT_WATCHDOG
endmenu

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
endmenu

source lib/Config.in