# drivers/sound/Config.in # # 18 Apr 1998, Michael Elizabeth Chastain, # More hacking for modularisation. # # Prompt user for primary drivers. dep_tristate ' ALi5455 audio support' CONFIG_SOUND_ALI5455 $CONFIG_SOUND $CONFIG_PCI dep_tristate ' BT878 audio dma' CONFIG_SOUND_BT878 $CONFIG_SOUND $CONFIG_PCI dep_tristate ' C-Media PCI (CMI8338/8738)' CONFIG_SOUND_CMPCI $CONFIG_SOUND $CONFIG_PCI if [ "$CONFIG_SOUND_CMPCI" = "y" -o "$CONFIG_SOUND_CMPCI" = "m" ]; then bool ' Enable legacy FM' CONFIG_SOUND_CMPCI_FM if [ "$CONFIG_SOUND_CMPCI_FM" = "y" ]; then define_hex CONFIG_SOUND_CMPCI_FMIO 388 hex ' FM I/O 388, 3C8, 3E0, 3E8' CONFIG_SOUND_CMPCI_FMIO 388 fi bool ' Enable legacy MPU-401' CONFIG_SOUND_CMPCI_MIDI if [ "$CONFIG_SOUND_CMPCI_MIDI" = "y" ]; then hex ' MPU-401 I/O 330, 320, 310, 300' CONFIG_SOUND_CMPCI_MPUIO 330 fi bool ' Enable joystick' CONFIG_SOUND_CMPCI_JOYSTICK bool ' Support CMI8738 based audio cards' CONFIG_SOUND_CMPCI_CM8738 if [ "$CONFIG_SOUND_CMPCI_CM8738" = "y" ]; then bool ' Inverse S/PDIF in for CMI8738' CONFIG_SOUND_CMPCI_SPDIFINVERSE bool ' Enable S/PDIF loop for CMI8738' CONFIG_SOUND_CMPCI_SPDIFLOOP int ' Number of speakers 2, 4, 5, 6' CONFIG_SOUND_CMPCI_SPEAKERS 2 if [ "$CONFIG_SOUND_CMPCI_SPEAKERS" != "2" ]; then bool ' Use Line-in as Read-out' CONFIG_SOUND_CMPCI_LINE_REAR bool ' Use Line-in as Bass' CONFIG_SOUND_CMPCI_LINE_BASS fi fi fi dep_tristate ' Creative SBLive! (EMU10K1)' CONFIG_SOUND_EMU10K1 $CONFIG_SOUND $CONFIG_PCI dep_mbool ' Creative SBLive! MIDI' CONFIG_MIDI_EMU10K1 $CONFIG_SOUND_EMU10K1 $CONFIG_EXPERIMENTAL dep_tristate ' Crystal SoundFusion (CS4280/461x)' CONFIG_SOUND_FUSION $CONFIG_SOUND $CONFIG_PCI dep_tristate ' Crystal Sound CS4281' CONFIG_SOUND_CS4281 $CONFIG_SOUND $CONFIG_PCI if [ "$CONFIG_SIBYTE_SB1250" = "y" -a "$CONFIG_REMOTE_DEBUG" != "y" ]; then dep_tristate ' Crystal Sound CS4297a (for Swarm)' CONFIG_SOUND_BCM_CS4297A $CONFIG_SOUND fi dep_tristate ' Ensoniq AudioPCI (ES1370)' CONFIG_SOUND_ES1370 $CONFIG_SOUND $CONFIG_PCI dep_tristate ' Creative Ensoniq AudioPCI 97 (ES1371)' CONFIG_SOUND_ES1371 $CONFIG_SOUND $CONFIG_PCI dep_tristate ' ESS Technology Solo1' CONFIG_SOUND_ESSSOLO1 $CONFIG_SOUND $CONFIG_PCI dep_tristate ' ESS Maestro, Maestro2, Maestro2E driver' CONFIG_SOUND_MAESTRO $CONFIG_SOUND $CONFIG_PCI dep_tristate ' ESS Maestro3/Allegro driver (EXPERIMENTAL)' CONFIG_SOUND_MAESTRO3 $CONFIG_SOUND $CONFIG_PCI $CONFIG_EXPERIMENTAL dep_tristate ' ForteMedia FM801 driver (EXPERIMENTAL)' CONFIG_SOUND_FORTE $CONFIG_SOUND $CONFIG_PCI $CONFIG_EXPERIMENTAL dep_tristate ' Intel ICH (i8xx), SiS 7012, NVidia nForce Audio or AMD 768/811x' CONFIG_SOUND_ICH $CONFIG_PCI if [ "$CONFIG_GSC_LASI" = "y" ]; then dep_tristate ' PA Harmony audio driver' CONFIG_SOUND_HARMONY $CONFIG_SOUND fi if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then dep_tristate ' IT8172G Sound' CONFIG_SOUND_IT8172 $CONFIG_SOUND fi dep_tristate ' RME Hammerfall (RME96XX) support' CONFIG_SOUND_RME96XX $CONFIG_SOUND $CONFIG_PCI $CONFIG_EXPERIMENTAL dep_tristate ' S3 SonicVibes' CONFIG_SOUND_SONICVIBES $CONFIG_SOUND $CONFIG_PCI if [ "$CONFIG_VISWS" = "y" ]; then dep_tristate ' SGI Visual Workstation sound' CONFIG_SOUND_VWSND $CONFIG_SOUND fi if [ "$CONFIG_SGI_IP22" = "y" ] ; then dep_tristate ' SGI HAL2 sound (EXPERIMENTAL)' CONFIG_SOUND_HAL2 $CONFIG_SOUND $CONFIG_SGI_IP22 $CONFIG_EXPERIMENTAL fi if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then dep_tristate ' IT8172G Sound' CONFIG_SOUND_IT8172 $CONFIG_SOUND fi if [ "$CONFIG_DDB5477" = "y" ]; then dep_tristate ' NEC Vrc5477 AC97 sound' CONFIG_SOUND_VRC5477 $CONFIG_SOUND fi if [ "$CONFIG_CPU_AU1X00" = "y" ]; then dep_tristate ' Au1x00 Sound' CONFIG_SOUND_AU1X00 $CONFIG_SOUND fi dep_tristate ' Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core' CONFIG_SOUND_TRIDENT $CONFIG_SOUND $CONFIG_PCI dep_tristate ' Support for Turtle Beach MultiSound Classic, Tahiti, Monterey' CONFIG_SOUND_MSNDCLAS $CONFIG_SOUND if [ "$CONFIG_SOUND_MSNDCLAS" = "y" -o "$CONFIG_SOUND_MSNDCLAS" = "m" ]; then if [ "$CONFIG_SOUND_MSNDCLAS" = "y" ]; then comment ' Compiled-in MSND Classic support requires firmware during compilation.' define_bool CONFIG_MSNDCLAS_HAVE_BOOT y else define_bool CONFIG_MSNDCLAS_HAVE_BOOT n fi string 'Full pathname of MSNDINIT.BIN firmware file' CONFIG_MSNDCLAS_INIT_FILE "/etc/sound/msndinit.bin" string 'Full pathname of MSNDPERM.BIN firmware file' CONFIG_MSNDCLAS_PERM_FILE "/etc/sound/msndperm.bin" fi if [ "$CONFIG_SOUND_MSNDCLAS" = "y" ]; then int ' MSND Classic IRQ 5, 7, 9, 10, 11, 12' CONFIG_MSNDCLAS_IRQ 5 hex ' MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000' CONFIG_MSNDCLAS_MEM D0000 hex ' MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0' CONFIG_MSNDCLAS_IO 290 fi dep_tristate ' Support for Turtle Beach MultiSound Pinnacle, Fiji' CONFIG_SOUND_MSNDPIN $CONFIG_SOUND if [ "$CONFIG_SOUND_MSNDPIN" = "y" -o "$CONFIG_SOUND_MSNDPIN" = "m" ]; then if [ "$CONFIG_SOUND_MSNDPIN" = "y" ]; then comment 'Compiled-in MSND Pinnacle support requires firmware during compilation.' define_bool CONFIG_MSNDPIN_HAVE_BOOT y else define_bool CONFIG_MSNDPIN_HAVE_BOOT n fi string ' Full pathname of PNDSPINI.BIN firmware file' CONFIG_MSNDPIN_INIT_FILE "/etc/sound/pndspini.bin" string ' Full pathname of PNDSPERM.BIN firmware file' CONFIG_MSNDPIN_PERM_FILE "/etc/sound/pndsperm.bin" fi if [ "$CONFIG_SOUND_MSNDPIN" = "y" ]; then int ' MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12' CONFIG_MSNDPIN_IRQ 5 hex ' MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000' CONFIG_MSNDPIN_MEM D0000 hex 'MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0' CONFIG_MSNDPIN_IO 290 bool ' MSND Pinnacle has S/PDIF I/O' CONFIG_MSNDPIN_DIGITAL bool ' MSND Pinnacle non-PnP Mode' CONFIG_MSNDPIN_NONPNP if [ "$CONFIG_MSNDPIN_NONPNP" = "y" ]; then comment 'MSND Pinnacle DSP section will be configured to above parameters.' hex 'MSND Pinnacle config port 250,260,270' CONFIG_MSNDPIN_CFG 250 comment 'Pinnacle-specific Device Configuration (0 disables)' hex 'MSND Pinnacle MPU I/O (e.g. 330)' CONFIG_MSNDPIN_MPU_IO 0 int 'MSND Pinnacle MPU IRQ (e.g. 9)' CONFIG_MSNDPIN_MPU_IRQ 0 hex 'MSND Pinnacle IDE I/O 0 (e.g. 170)' CONFIG_MSNDPIN_IDE_IO0 0 hex 'MSND Pinnacle IDE I/O 1 (e.g. 376)' CONFIG_MSNDPIN_IDE_IO1 0 int 'MSND Pinnacle IDE IRQ (e.g. 15)' CONFIG_MSNDPIN_IDE_IRQ 0 hex 'MSND Pinnacle joystick I/O (e.g. 200)' CONFIG_MSNDPIN_JOYSTICK_IO 0 fi fi if [ "$CONFIG_SOUND_MSNDPIN" = "y" -o "$CONFIG_SOUND_MSNDCLAS" = "y" ]; then int 'MSND buffer size (kB)' CONFIG_MSND_FIFOSIZE 128 fi dep_tristate ' VIA 82C686 Audio Codec' CONFIG_SOUND_VIA82CXXX $CONFIG_PCI dep_mbool ' VIA 82C686 MIDI' CONFIG_MIDI_VIA82CXXX $CONFIG_SOUND_VIA82CXXX if [ "$CONFIG_ARCH_SA1100" = "y" ]; then dep_tristate ' StrongARM-11x0 Sound Drivers' CONFIG_SOUND_SA1100 $CONFIG_ARCH_SA1100 $CONFIG_SOUND dep_tristate ' UDA1341 Stereo Codec' CONFIG_SOUND_UDA1341 $CONFIG_L3 $CONFIG_SOUND_SA1100 $CONFIG_SOUND dep_tristate ' Assabet audio support' CONFIG_SOUND_ASSABET_UDA1341 $CONFIG_SA1100_ASSABET $CONFIG_SOUND_UDA1341 dep_tristate ' Compaq iPAQ audio support' CONFIG_SOUND_H3600_UDA1341 $CONFIG_SA1100_H3600 $CONFIG_SOUND_UDA1341 dep_tristate ' Pangolin audio support' CONFIG_SOUND_PANGOLIN_UDA1341 $CONFIG_SA1100_PANGOLIN $CONFIG_SOUND_UDA1341 dep_tristate ' SA1111 audio support' CONFIG_SOUND_SA1111_UDA1341 $CONFIG_SA1111 $CONFIG_SOUND_UDA1341 dep_tristate ' SA1111 AC97 Sound' CONFIG_SOUND_SA1111_AC97 $CONFIG_SA1111 $CONFIG_SOUND_SA1100 dep_tristate ' Generic DAC on the SA11x0 SSP port' CONFIG_SOUND_SA1100SSP $CONFIG_SOUND_SA1100 fi if [ "$CONFIG_SABINAL_DISCOVERY" = "y" ]; then dep_bool ' Discovery Sound Drivers' CONFIG_SOUND_DISCOVERY $CONFIG_COTULLA_DMA $CONFIG_SOUND fi dep_tristate ' OSS sound modules' CONFIG_SOUND_OSS $CONFIG_SOUND if [ "$CONFIG_SOUND_OSS" = "y" -o "$CONFIG_SOUND_OSS" = "m" ]; then bool ' Verbose initialisation' CONFIG_SOUND_TRACEINIT bool ' Persistent DMA buffers' CONFIG_SOUND_DMAP if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then dep_tristate ' AD1816(A) based cards (EXPERIMENTAL)' CONFIG_SOUND_AD1816 $CONFIG_SOUND_OSS fi dep_tristate ' Aztech Sound Galaxy (non-PnP) cards' CONFIG_SOUND_SGALAXY $CONFIG_SOUND_OSS dep_tristate ' Adlib Cards' CONFIG_SOUND_ADLIB $CONFIG_SOUND_OSS dep_tristate ' ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)' CONFIG_SOUND_ACI_MIXER $CONFIG_SOUND_OSS dep_tristate ' Crystal CS4232 based (PnP) cards' CONFIG_SOUND_CS4232 $CONFIG_SOUND_OSS dep_tristate ' Ensoniq SoundScape support' CONFIG_SOUND_SSCAPE $CONFIG_SOUND_OSS dep_tristate ' Gravis Ultrasound support' CONFIG_SOUND_GUS $CONFIG_SOUND_OSS if [ "$CONFIG_SOUND_GUS" != "n" ]; then bool ' 16 bit sampling option of GUS (_NOT_ GUS MAX)' CONFIG_SOUND_GUS16 bool ' GUS MAX support' CONFIG_SOUND_GUSMAX fi dep_tristate ' Loopback MIDI device support' CONFIG_SOUND_VMIDI $CONFIG_SOUND_OSS dep_tristate ' MediaTrix AudioTrix Pro support' CONFIG_SOUND_TRIX $CONFIG_SOUND_OSS if [ "$CONFIG_SOUND_TRIX" = "y" ]; then bool ' Have TRXPRO.HEX firmware file' CONFIG_TRIX_HAVE_BOOT if [ "$CONFIG_TRIX_HAVE_BOOT" = "y" ]; then string ' Full pathname of TRXPRO.HEX firmware file' CONFIG_TRIX_BOOT_FILE /etc/sound/trxpro.hex fi fi dep_tristate ' Microsoft Sound System support' CONFIG_SOUND_MSS $CONFIG_SOUND_OSS dep_tristate ' MPU-401 support (NOT for SB16)' CONFIG_SOUND_MPU401 $CONFIG_SOUND_OSS dep_tristate ' NM256AV/NM256ZX audio support' CONFIG_SOUND_NM256 $CONFIG_SOUND_OSS dep_tristate ' OPTi MAD16 and/or Mozart based cards' CONFIG_SOUND_MAD16 $CONFIG_SOUND_OSS if [ "$CONFIG_SOUND_MAD16" = "y" -o "$CONFIG_SOUND_MAD16" = "m" ]; then bool ' Support MIDI in older MAD16 based cards (requires SB)' CONFIG_MAD16_OLDCARD fi dep_tristate ' ProAudioSpectrum 16 support' CONFIG_SOUND_PAS $CONFIG_SOUND_OSS dep_bool ' Enable PAS16 joystick port' CONFIG_PAS_JOYSTICK $CONFIG_SOUND_PAS dep_tristate ' PSS (AD1848, ADSP-2115, ESC614) support' CONFIG_SOUND_PSS $CONFIG_SOUND_OSS if [ "$CONFIG_SOUND_PSS" = "y" -o "$CONFIG_SOUND_PSS" = "m" ]; then bool ' Enable PSS mixer (Beethoven ADSP-16 and other compatibile)' CONFIG_PSS_MIXER bool ' Have DSPxxx.LD firmware file' CONFIG_PSS_HAVE_BOOT if [ "$CONFIG_PSS_HAVE_BOOT" = "y" ]; then string ' Full pathname of DSPxxx.LD firmware file' CONFIG_PSS_BOOT_FILE /etc/sound/dsp001.ld fi fi dep_tristate ' 100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support' CONFIG_SOUND_SB $CONFIG_SOUND_OSS dep_tristate ' AWE32 synth' CONFIG_SOUND_AWE32_SYNTH $CONFIG_SOUND_OSS dep_tristate ' Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards' CONFIG_SOUND_WAVEFRONT $CONFIG_SOUND_OSS m dep_tristate ' Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers' CONFIG_SOUND_MAUI $CONFIG_SOUND_OSS if [ "$CONFIG_SOUND_MAUI" = "y" ]; then bool ' Have OSWF.MOT firmware file' CONFIG_MAUI_HAVE_BOOT if [ "$CONFIG_MAUI_HAVE_BOOT" = "y" ]; then string ' Full pathname of OSWF.MOT firmware file' CONFIG_MAUI_BOOT_FILE /etc/sound/oswf.mot fi fi dep_tristate ' Yamaha FM synthesizer (YM3812/OPL-3) support' CONFIG_SOUND_YM3812 $CONFIG_SOUND_OSS dep_tristate ' Yamaha OPL3-SA1 audio controller' CONFIG_SOUND_OPL3SA1 $CONFIG_SOUND_OSS dep_tristate ' Yamaha OPL3-SA2 and SA3 based PnP cards' CONFIG_SOUND_OPL3SA2 $CONFIG_SOUND_OSS dep_tristate ' Yamaha YMF7xx PCI audio (native mode)' CONFIG_SOUND_YMFPCI $CONFIG_SOUND_OSS $CONFIG_PCI dep_mbool ' Yamaha PCI legacy ports support' CONFIG_SOUND_YMFPCI_LEGACY $CONFIG_SOUND_YMFPCI dep_tristate ' 6850 UART support' CONFIG_SOUND_UART6850 $CONFIG_SOUND_OSS dep_tristate ' Gallant Audio Cards (SC-6000 and SC-6600 based)' CONFIG_SOUND_AEDSP16 $CONFIG_SOUND_OSS if [ "$CONFIG_SOUND_AEDSP16" = "y" -o "$CONFIG_SOUND_AEDSP16" = "m" ]; then bool ' SC-6600 based audio cards (new Audio Excel DSP 16)' CONFIG_SC6600 if [ "$CONFIG_SC6600" = "y" ]; then bool ' Activate SC-6600 Joystick Interface' CONFIG_SC6600_JOY int ' SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)' CONFIG_SC6600_CDROM 4 hex ' SC-6600 CDROM Interface I/O Address' CONFIG_SC6600_CDROMBASE 0 fi if [ "$CONFIG_SOUND_SB" = "y" -o "$CONFIG_SOUND_SB" = "m" ]; then if [ "$CONFIG_AEDSP16_MSS" != "y" ]; then bool ' Audio Excel DSP 16 (SBPro emulation)' CONFIG_AEDSP16_SBPRO fi fi if [ "$CONFIG_SOUND_MSS" = "y" -o "$CONFIG_SOUND_MSS" = "m" ]; then if [ "$CONFIG_AEDSP16_SBPRO" != "y" ]; then bool ' Audio Excel DSP 16 (MSS emulation)' CONFIG_AEDSP16_MSS fi fi if [ "$CONFIG_SOUND_MPU401" = "y" -o "$CONFIG_SOUND_MPU401" = "m" ]; then bool ' Audio Excel DSP 16 (MPU401 emulation)' CONFIG_AEDSP16_MPU401 fi fi if [ "$CONFIG_ARCH_DBMX2" = "y" ]; then dep_tristate ' Wolfsen MW8731 CODEC' CONFIG_SOUND_DBMX_MW8731 $CONFIG_SOUND_OSS fi fi if [ "$CONFIG_ARM" = "y" ]; then if [ "$CONFIG_ARCH_ACORN" = "y" -o "$CONFIG_ARCH_CLPS7500" = "y" -o "$CONFIG_ARCH_RISCSTATION" ]; then dep_tristate ' VIDC 16-bit sound' CONFIG_SOUND_VIDC $CONFIG_SOUND_OSS fi dep_tristate ' Netwinder WaveArtist' CONFIG_SOUND_WAVEARTIST $CONFIG_SOUND_OSS $CONFIG_ARCH_NETWINDER dep_tristate ' Intel PXA250/210 AC97 audio' CONFIG_SOUND_PXA_AC97 $CONFIG_ARCH_PXA $CONFIG_SOUND dep_tristate ' Poodle audio support' CONFIG_SOUND_POODLE $CONFIG_ARCH_PXA $CONFIG_SOUND dep_tristate ' Corgi audio support' CONFIG_SOUND_CORGI $CONFIG_ARCH_PXA $CONFIG_SOUND dep_tristate ' Tosa audio support' CONFIG_SOUND_TOSA $CONFIG_AC97_TOSA $CONFIG_SOUND dep_tristate ' Tosa buzzer support' CONFIG_BUZZER_TOSA $CONFIG_SOUND_TOSA dep_tristate ' Spitz audio support' CONFIG_SOUND_SPITZ $CONFIG_ARCH_PXA $CONFIG_SOUND fi if [ "$CONFIG_SUPERH" = "y" ]; then dep_tristate ' MS7760CP01 UDA1342 Stereo Codec' CONFIG_SOUND_MS7760CP_UDA1342 $CONFIG_SH_7760_SOLUTION_ENGINE $CONFIG_SOUND_OSS fi dep_tristate ' TV card (bt848) mixer support' CONFIG_SOUND_TVMIXER $CONFIG_SOUND $CONFIG_I2C # A cross directory dependence. The sound modules will need gameport.o compiled in, # but it resides in the drivers/char/joystick directory. This define_tristate takes # care of that. --Vojtech if [ "$CONFIG_INPUT_GAMEPORT" != "n" ]; then if [ "$CONFIG_SOUND_ESSSOLO1" = "y" -o "$CONFIG_SOUND_ES1370" = "y" -o "$CONFIG_SOUND_ES1371" = "y" -o "$CONFIG_SOUND_SONICVIBES" = "y" ]; then define_tristate CONFIG_INPUT_GAMEPORT y fi fi