#!/bin/sh


ARG0=`basename $0`
ARG1=$1

usage() {
cat <<-EOF
usage: usbd command
    clone	clone device subdirectory from bk::/whiskey.enposte.net/usbd
    build
    tgz

EOF
}

arch() {

	SA1100=`egrep "CONFIG_SA11.*=y" .config | 
		sed -e '/FREQ/d;/RTC/d;/FIR/d;/VOLT/d;/DMA/d;/USB/d;/REGMON/d;/_H3[1-9]/d;/_IDR/d'`

	BUS=`egrep "^CONFIG_USBD_.*_BUS" .config | 
		sed /GENERIC/d`

	#echo SA1100: $SA1100
	#echo BUS: $BUS
	case "$BUS" in
	CONFIG_USBD_SA1100_BUS*) export BUS=$SA1100 ;;
	esac

	BUS=`expr "$BUS" : '\(.*\)=.*'`

	echo $BUS
}

usbdmake() {
	pushd ../../..
	make SUBDIRS=drivers/usb/device $*
	popd
}

case "${ARG1}" in

clone)
	set -x
	bk clone -q bk://whiskey.enposte.net/usbd usbd 
	cd device
	bk -r co -q
	;;

citool)
	set -x
	bk citool&
	;;

push)
	set -x
	bk push
	;;


patch-usb)
	set -x
	mv Config.in Config.in-
	sed '/endmenu/d' < Config.in- > Config.in
	(
		echo
		echo "source drivers/usb/device/Config.in" 
		echo
		echo "endmenu" 
	) >> Config.in

	cp Makefile Makefile-
	(
		echo
		echo 'subdir-$(CONFIG_USBD)           += device'
		echo
	) >> Makefile

	CWD=`pwd`
	BASE=`dirname $CWD`
	BASE=`dirname $BASE`
	ln -s $BASE/.config device/.config
	;;

clean)
	usbdmake clean
	;;

modules)
	usbdmake modules
	;;

arch)
	arch
	;;

build)

	ARCH=`arch`
	case "$ARCH" in
	CONFIG_USBD_PXA_BUS)
		export DEST=../../../a3/latest_modules
		export SRC=pxa
		export NAME=pxa
		export STRIP=arm-linux-strip
		;;
	CONFIG_USBD_L7205_BUS)
		export DEST=/tftpboot/tmp/l7205/tmp
		export SRC=l7205
		export NAME=l7205
		;;
	CONFIG_USBD_SL11_BUS)
		export DEST=/tftpboot/tmp/sl11/tmp
		export SRC=sl11
		export NAME=sl11
		;;
	CONFIG_SA1100_CALYPSO|CONFIG_SA1110_CALYPSO)
		export DEST=/tftpboot/192.168.40.101/modules
		export SRC=sa1100
		export NAME=sa1100
		;;
	CONFIG_SA1100_ASSABET)
		export DEST=/tftpboot/tmp/assabet/tmp
		export SRC=sa1100
		export NAME=sa1100
		;;
	CONFIG_SA1111)
		export DEST=/tftpboot/tmp/vercel/tmp
		export SRC=sa1100
		export NAME=sa1100
		;;
	CONFIG_SA1100_H3XXX)
		export DEST=/tftpboot/tmp/ipaq/tmp
		export SRC=sa1100
		export NAME=sa1100
		;;
	CONFIG_SA1100_BITSY)
		export DEST=/tftpboot/tmp/ipaq/tmp
		export SRC=sa1100
		export NAME=sa1100
		;;
	CONFIG_SA1100_COLLIE)
		export DEST=/tftpboot/tmp/collie/tmp
		export SRC=sa1100
		export NAME=sa1100
		;;
	CONFIG_USBD_SUPERH_BUS)
		#export DEST=/tftpboot/tmp/sh7727/tmp 
		export DEST=/tftpboot/192.168.40.230/rootfsdir/tmp
		export SRC=superh
		export NAME=superh
		;;
	esac

	if [ ! -f "usbd-build.h" ] ; then
		echo "#define USBD_BUILD          \"000\"" > usbd-build.h
	else
		sed < usbd-build.h '/USBD_BUILD/s/^#define.*USBD_BUILD.*"\(.*\)"/XX \1/' |
		awk '{ if ($1 == "XX") printf "#define USBD_BUILD   \"%03d\"\n", $2+1 ; else print $0 }' > usbd-build.h-new
		mv usbd-build.h-new usbd-build.h
	fi

	rm -rf *.o */*.o */*/*.o 2>/dev/null

	usbdmake modules

	echo ARCH: $ARCH
	echo SRC: $SRC
	echo DEST: $DEST
	echo NAME: $NAME

#	mkdir -p ${DEST} /tmp/USBD
#	chown -R sl.sl /tmp/USBD

	MODULES=` for i in usbdcore usbdmonitor serial_fd/serial_fd \
		net_fd/net_fd bi/${NAME}_bi bi/gen_bi  ; do
		[ -s "$i.o" ] && echo "$i.o" 
		done`

	echo MODULES: ${MODULES}
	for i in ${MODULES} ; do
		[ -n "$STRIP" ] && $STRIP -g $i
		cp "$i" "$DEST"
	done

#	tar cvfz /tmp/USBD/$ARCH-`date '+%Y%m%d%H%M'`.tgz ${MODULES}

	;;

*)
	usage
	;;
esac