# $USAGI: Config.in,v 1.63.2.4.2.1 2003/02/05 07:45:55 yoshfuji Exp $
#
# IPv6 configuration
#

#mainmenu_option next_comment
#comment '  IPv6 Configuration'

# --- overall ---
bool '    IPv6: Verbose debugging messages' CONFIG_IPV6_DEBUG

# --- module interface ---
if [ "$CONFIG_IPV6" = "m" ]; then
   bool '    IPv6: inter-module support.' CONFIG_IPV6_IM
   if [ "$CONFIG_NET_IPGRE" != "n" ]; then
      bool '      IPv6: enable gre tunnel support with modulized ipv6' CONFIG_IPV6_MODULE_IP_GRE
   fi
fi

# --- IPv6 Specification (RFC2460) and Addressing Architecture (RFC2373) ---
#bool '    IPv6: Loose scope_id' CONFIG_IPV6_LOOSE_SCOPE_ID
bool '    IPv6: drop packets with fake ipv4-mapped address(es)' CONFIG_IPV6_DROP_FAKE_V4MAPPED
if [ "$CONFIG_IPV6" = "y" -o "$CONFIG_IPV6_IM" = "y" ]; then
   bool '    IPv6: Restrict "double binding" only for same user' CONFIG_IPV6_RESTRICTED_DOUBLE_BIND
fi
bool '    IPv6: 6to4-address in nexthop support.' CONFIG_IPV6_6TO4_NEXTHOP
bool '    IPv6: Privacy Extensions (RFC 3041) support' CONFIG_IPV6_PRIVACY
bool '    IPv6: anycast support' CONFIG_IPV6_ANYCAST
if [ "$CONFIG_IPV6_ANYCAST" != "n" ]; then
	define_bool CONFIG_IPV6_ANYCAST_GROUP y
fi

# --- ISATAP interface ---
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    bool '    IPv6: ISATAP interface support (EXPERIMENTAL)' CONFIG_IPV6_ISATAP
fi

# --- NDP (RFC2461) ---
if [ "$CONFIG_IPV6_DEBUG" = "y" ]; then
   bool '    IPv6: Neighbor Discovery debugging' CONFIG_IPV6_NDISC_DEBUG
fi

# --- Stateless Address Configuration (RFC2462) ---
if [ "$CONFIG_IPV6_DEBUG" = "y" ]; then
   bool '    IPv6: Address Autoconfigration debugging' CONFIG_IPV6_ACONF_DEBUG
   if [ "$CONFIG_IPV6_ACONF_DEBUG" = "y" ]; then
      bool '      IPv6: Debug on source address selection' CONFIG_IPV6_ACONF_DEBUG_SADDR
   fi
fi

# --- Routing ---
if [ "$CONFIG_IPV6_DEBUG" = "y" ]; then
   bool '    IPv6: Routing Information debugging' CONFIG_IPV6_RT6_DEBUG
fi
bool '    IPv6: sub-tree in routing table support (just for testing)' CONFIG_IPV6_SUBTREES

# --- MLD (RFC2710) ---
if [ "$CONFIG_IPV6_DEBUG" = "y" ]; then
   bool '    IPv6: Multicast Listener Discovery debugging' CONFIG_IPV6_MLD6_DEBUG
fi
bool '    IPv6: disable optimization MLD6 Done message' CONFIG_IPV6_MLD6_ALL_DONE

# --- Node Information Queries (Internet Draft) ---
bool '    IPv6: enable Node Information Queries' CONFIG_IPV6_NODEINFO
if [ "$CONFIG_IPV6_NODEINFO" = "y" ]; then
   if [ "$CONFIG_IPV6_DEBUG" = "y" ]; then
       bool '      IPv6: Node Information Queries debugging' CONFIG_IPV6_NODEINFO_DEBUG
   fi
   bool '      IPv6: regard NIS domain as DNS domain' CONFIG_IPV6_NODEINFO_USE_UTS_DOMAIN
fi

# --- Socket Interface (RFC2292, RFC2553) ---

# --- Filtering ---
if [ "$CONFIG_NETFILTER" != "n" ]; then
   source net/ipv6/netfilter/Config.in
fi

# --- Misc. ---
#bool '    IPv6: flow policy support' CONFIG_RT6_POLICY
#bool '    IPv6: firewall support' CONFIG_IPV6_FIREWALL

# -- IPsec --
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   if [ "$CONFIG_IPSEC" != "n" ] ; then
      bool '    IPv6: IP Security Support (EXPERIMENTAL)' CONFIG_IPV6_IPSEC 
   fi
   if [ "$CONFIG_IPSEC_TUNNEL" != "n" ]; then
      define_bool CONFIG_IPV6_IPSEC_TUNNEL y
   fi
fi

# --- Mobile IP ---
dep_tristate '    IPv6: IPv6 over IPv6 Tunneling (EXPERIMENTAL)' CONFIG_IPV6_IPV6_TUNNEL m

#endmenu